|
Title: Double Banjo Coupling Post by: Angle Grinder on 19 March, 2018, 10:40:02 AM This Spring I intend to replace the Servo unit on my Flavia with a modern dual circuit remote servo. I have already bought the servo unit, but space is at a bit of a premium so I am looking for a double banjo coupling to keep the overall length of the "plumbing" as short as possible, rather than adding extra length by using using 2 single banjo couplings in tandem.
MY problem is that the only double banjo fitments that I can find are for connecting brake hoses and not for connecting copper brake pipes with 3/8 UNF flare nuts. Has anyone got any suggestions for a supplier of said part? Title: Re: Double Banjo Coupling Post by: ColinMarr on 19 March, 2018, 10:50:36 AM I suggest you try Think Automotive - https://www.thinkauto.com/ . I found them very helpful years ago when they were based at Isleworth. They had an amazing range of metric and UNF fittings.
Title: Re: Double Banjo Coupling Post by: Neil on 19 March, 2018, 12:15:28 PM They have recently moved to a new location in Ashford (Surrey)
Think Automotive Ltd Thames House Ashford Road Ashford TW15 1XB +44 208 568 1172 |