|
Title: Inner door pull. Post by: fulvia815 on 05 December, 2018, 09:48:21 AM Anyone know how to repair the foam filling on the inner door pulls of a fulvia coupe? Mine are disintegrating.
Title: Re: Inner door pull. Post by: Richard Fridd on 05 December, 2018, 06:02:52 PM Remove existing and replace with expanding foam?
Title: Re: Inner door pull. Post by: stanley sweet on 05 December, 2018, 06:55:22 PM Think Brian Halton did a similar repair on his disintegrating dash top some years ago. I remember he wrote it up in VL and possibly posted on here but can't help much further than that.
Title: Re: Inner door pull. Post by: fay66 on 05 December, 2018, 09:02:23 PM Stans correct I rebuilt a number of items where the foam had turned to dust.
You really need to remove the armrest and see of it has a metal former inside, if so scrape out the old foam and using the outer cover to retain the builders foam that I used to rebuild my items. Do not try to use to much foam at one go as it expands quite lot, and might distort the cover. Build the foam up in thin layers, then trim the excess of the back when dry. I found it was very successful except if the pieces being filled was thin with no metal former, which is how the component is fixed in place. Brian 8227 8) Title: Re: Inner door pull. Post by: fulvia815 on 07 December, 2018, 07:24:13 AM Many thanks.
|