Lancia Motor Club

Having finished reassembling the B21S transaxle and fitting rebuilt pot joints to it, I find I have a couple of surplus rebuilt ( with new needle rollers, shims and rubbers) unworn complete pot joints.

I also have surplus to requirements:

2  x brand new unused cages Part 24
2 x brand new unused output shafts Part 9
4 x brand new unused blocks Part 28
And I have new needle rollers to suit the above

All of these new parts were sourced from the well known Lancia supplier in Turin.

And then working along the drive shaft towards the outside I have a few good used couplings Part 18
Any reasonable offers considered - obviously at a significant  discount from the suppliers list prices today.
Chris

Hi Chris!

Are any of these parts  still available?

If so,
What kind of cage ( part#24) do you have?
Is it the "sleek" type on the tavola, or is it the heavier type, with additional oiling holes?


Thank you
Torstein

Hello Torstein,
Yes, I have a couple of rebuilt pot joints and also a couple of surplus new cages with sliding blocks which came from Cavalitto.
I will post photos of the new parts later today if I may.
Chris

Thank you Chris!

I have 2 new cages which are the heavier type with holes (which I think are actually Flaminia as well?) and 4 new sliding blocks.
I cant put my hands on the new output shafts just now so I may well have used them when building up rebuilt complete pot joints.
The complete rebuilt pot joints have new needle rollers, new concertina type rubbers, good used unworn outer casings with good unworn inner cages (without holes), good used sliding unworn shimmed blocks and good used output shafts. They are therefore ready for immediate use.
Chris

Thank you Chris!
I will email you later today.

Torstein

Just one new inner cage and 2 new sliding blocks available now....at significantly less than todays prices.
Also a couple of complete rebuilt pot joints available.
Chris