|
Title: Dellorto drip tray Post by: simonpen on 28 July, 2021, 06:18:55 PM My Fulvia is fitted with a pair of DHLA45 on a GP4 manifold. I would like to fit a drip tray under, has anyone done this or have a pattern for same?
Title: Re: Dellorto drip tray Post by: frankxhv773t on 29 July, 2021, 11:20:51 AM I had an impression that drip trays were both standard fit and necessary for safety. I have this pair of pictures in my archive which may be of assistance as to general layout. I can't help with dimensions though I'm afraid.
Title: Re: Dellorto drip tray Post by: fay66 on 29 July, 2021, 11:36:09 AM My Fulvia is fitted with a pair of DHLA45 on a GP4 manifold. I would like to fit a drip tray under, has anyone done this or have a pattern for same? A lot smaller as my Dellortos are 32s, but the standard drip tray wasn't a problem.Brian 8227 8) Title: Re: Dellorto drip tray Post by: lancialulu on 29 July, 2021, 02:43:22 PM The problem is that a standard drip tray will not work. The DHLA's are wider than the Fulvia Solex/DHLB set up and genrally run off a works manifold or adaptor to accomodate the wider and longer DHLA's. The principle may be ok but probably better is to design a shield over the alternator so any fuel leakage is not exposed to a sparkling commutator....
Title: Re: Dellorto drip tray Post by: simonpen on 29 July, 2021, 07:40:51 PM Thanks Tim, that makes sense.
|