|
Title: Engine Stabilising Arm Setting Post by: Barry.Cook on 25 May, 2022, 06:18:48 AM Hi,
Could anyone tell me what the gap should be between the subframe and the stabilising arm on the righthand side of the engine? The car is a 1600HF. Many thanks, Barry Title: Re: Engine Stabilising Arm Setting Post by: lancialulu on 25 May, 2022, 06:31:02 AM Make sure the rubber pad is still there. I always set to touching. Also check the welding has not cracked either at the plate or adjuster. If it cannot be adjusted maybe the exhaust side engine mounts are worn.
Title: Re: Engine Stabilising Arm Setting Post by: Barry.Cook on 25 May, 2022, 08:05:18 AM Thank you for such a swift response. The rubber is still there and there is sufficient adjustment so I will now set it as you suggest.
Regards, Barry Title: Re: Engine Stabilising Arm Setting Post by: nistri on 31 May, 2022, 06:51:09 AM The Lancia manual says 2 mm clearance, Andrea
|