|
Title: Delta HF4WD / Integrale group A front fog lamp panels Post by: theoldsmithy on 25 January, 2023, 08:33:23 PM Hi all
I recently managed to source an original group A style front bumper fog lamp panel. As I could only find one I have had it scanned to flip & 3D print to produce a pair. If anyone is interested in a pair please do let me know. They fit by way of the sprung steel clips as found on the normal spec blanking panels. Without the clips I can do a pair of panels including UK postage for £130. If you need the clips fabricating let me know, where I went they are pricey as it's quite a lot of fiddly work to make them with the right 'spring' (so they tell me). I admit I have used rather a high quality facility to make them, so I daresay they could probably be fabricated cheaper & would work fine! But they're next door to the scanners so very handy to use. Normal blanking plates can often be found on ebay that will provide the clips, although the panels are then of no use of course. Here are photos of them (grey is the original) plus a gratuitous shot of a lovely HF4WD wearing a pair. |