Lancia Motor Club

Model Technical and Interest => Aprilia, Ardennes and Ardea => Topic started by: John Larkin on 15 July, 2023, 04:41:06 PM



Title: Rear anti-roll bar?
Post by: John Larkin on 15 July, 2023, 04:41:06 PM
I have found what I can only describe as a possible anti-roll bar at the rear of my 1949 Aprilia berlina. It comprises a circular bar about 20mm in diameter installed forward of the leaf spring.  Each outer end of this bar turns rearwards and is clamped to the lever arm of the damper on each side.  The traversing section of the bar is not attached to the bodyshell.

Is this a piece of home-made engineering or something from Lancia?

John


Title: Re: Rear anti-roll bar?
Post by: John Larkin on 15 July, 2023, 04:42:12 PM
I don't know why the image is upside down. Sorry.


Title: Re: Rear anti-roll bar?
Post by: Parisien on 15 July, 2023, 05:06:35 PM
I don't know why the image is upside down. Sorry.

John, when you click on image to enlarge, its the correct way up.

P