|
Title: Seat cover Post by: Spider2 on 22 March, 2024, 05:06:45 PM My drivers side (LHD) seat bolster has split so am looking either for a seat back or a firm who supplies the cover. My local uphostlerer says it is a difficult job to repair as it is all hand stiched. This is for a S1 sport.
Cheers Title: Re: Seat cover Post by: HBG on 22 March, 2024, 07:39:47 PM Have you got a photo of the split? Has the seam come undone? My seat base covers have needed a couple of repairs I've sewn by hand. Wasn't too difficult if a little slow. Also there is a previous repair panel sewn in.
Title: Re: Seat cover Post by: Spider2 on 23 March, 2024, 02:39:42 PM Hi Howard,
I do not have a picture because the seat back is at the upholsterers. It is only about 3 inches, by the drivers shoulder, that has become unstitched. The Vynyl has not split. I guess it is quite an easy job, once the cover is off. Was that an offer from you! LOL! I could find a couple of nice bottles from the cellar if you are interested. Cheers Simon Title: Re: Seat cover Post by: HBG on 23 March, 2024, 04:38:10 PM Not exactly an offer, more a case of encouragement and blind leading blind advise!
However, for wine..... Actually I'd like to know how the backs are removed and the covers come of as I reckon re- foaming is required on mine......and the head rests don't move well on one seat, not at all on the other. Title: Re: Seat cover Post by: Spider2 on 23 March, 2024, 08:43:15 PM Mine is a series 1 Sport so there are no headrests. The seat back came off by undoing the two phillps head screws that hold the hinge to the frame of the seat back. The cover appears to be held tight in place by hand sewn twine around the bottom edge. Perhaps I will attemt it myself
|