Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: jonamery on 30 December, 2024, 08:47:26 PM

Title: Sump oil pickup cap screws
Post by: jonamery on 30 December, 2024, 08:47:26 PM: Hello,

Long shot… I’ve misplaced the 2 sets of 2 cap screws that attach the oil pickup to the crankcase.

I don’t suppose anyone knows their length? They are m6 x 1 thread.

Also, if anyone has a sump available with the drain hole at the rear rather than the middle and its pickup, I’d be interested.

Many thanks,

Jon
Title: Re: Sump oil pickup cap screws
Post by: Spider2 on 31 December, 2024, 02:04:11 PM: I have a set of those cap screws from when I dismantled a 302 engine last year. I'll try to locate the baggie i put them in. Also have a sump in very good condition with no broken fins. Will check out where the plug is.
Title: Re: Sump oil pickup cap screws
Post by: jonamery on 31 December, 2024, 08:46:23 PM: Many thanks, much appreciated! I think the ones that attach on the bracket at the end of the tube are shorter..
Title: Re: Sump oil pickup cap screws
Post by: lancialulu on 01 January, 2025, 09:26:34 AM: Quote from: jonamery on 31 December, 2024, 08:46:23 PM
Many thanks, much appreciated! I think the ones that attach on the bracket at the end of the tube are shorter..
The bracket set screws also have a shorter head.
Title: Re: Sump oil pickup cap screws
Post by: Spider2 on 04 January, 2025, 12:24:26 PM: Sorry but my spare sump has the oil drain in the middle. I have a spare strainer and pick up if you need one.
Title: Re: Sump oil pickup cap screws
Post by: jonamery on 04 January, 2025, 07:42:06 PM: I sent you an email, still maybe interested as the sump I have has damage to the fins.
Title: Re: Sump oil pickup cap screws
Post by: fay66 on 05 January, 2025, 11:51:10 AM: Did any model of Fulvia have the sump other than in the middle of the sump?
Both my series 1 Coupe and My 2c Berlina both have a central drain plug.
Never found it a problem myself?
Brian
8227 8)
Title: Re: Sump oil pickup cap screws
Post by: lancialulu on 05 January, 2025, 12:05:57 PM: Quote from: fay66 on 05 January, 2025, 11:51:10 AM
Did any model of Fulvia have the sump other than in the middle of the sump?
Both my series 1 Coupe and My 2c Berlina both have a central drain plug.
Never found it a problem myself?
Brian
8227 8)
Earlier Fanalone 1.5HF had a larger (sand cast) sump with the drain to the rear. Fulvia 3 saw the introduction of a different (investment cast) sump from standard with marginally more capacity and a drain plug at the rear.
Title: Re: Sump oil pickup cap screws
Post by: nistri on 05 January, 2025, 03:23:06 PM: The S3 sump with the plug at the back originates from the contemparary FIAT 127.
Title: Re: Sump oil pickup cap screws
Post by: fay66 on 07 January, 2025, 08:43:46 AM: Quote from: lancialulu on 05 January, 2025, 12:05:57 PM
Quote from: fay66 on 05 January, 2025, 11:51:10 AM
Did any model of Fulvia have the sump other than in the middle of the sump?
Both my series 1 Coupe and My 2c Berlina both have a central drain plug.
Never found it a problem myself?
Brian
8227 8)
Earlier Fanalone 1.5HF had a larger (sand cast) sump with the drain to the rear. Fulvia 3 saw the introduction of a different (investment cast) sump from standard with marginally more capacity and a drain plug at the rear.
Thanks Tim,
New to me !
Brian
8827 8)