|
Title: Series 1 Handbrake pad missing! Post by: angelorange on 08 April, 2009, 08:17:57 PM Have MoT tomorrow and was about to tighten up the Dunlop Handbrake mechanism when I noticed O/S wheel inside pad was completely missing except for the backing plate!
The other 3 pads have 15mm of thickness remaining. Is this a specialist item or can a motor factors supply these pads? Are they the same as Jaguar parts? Thanks Title: Re: Series 1 Handbrake pad missing! Post by: rogerelias on 08 April, 2009, 08:50:44 PM Hi. I don't think that a motor factors will have pads in stock, i may be wrong, but i too thought that they are the same as Jaguar mk2 rear pads. Probably not what you wanted to hear, but hopefully answers your question, suggestion, re-book mot ,and contact Omicron, who will probably have in stock, and i have found delivery service is rapid. Good luck
Title: Re: Series 1 Handbrake pad missing! Post by: fay66 on 08 April, 2009, 11:45:55 PM I usually buy mine from Omicron as well, keep your fingers crossed that the mechanism is free and not corroded or rusty :o
I think the brake pads maybe the same as Jaguar, but I'm not sure about the handbrake pads. Brian 8227 8). Just dug out my CD on Dunlop Brakes, many Jaguars from 1958 on used the same Handbrake pads as Series 1 Fulvia Coupe & Berlina, as did other Lancia, the Dunlop part number was 64932129LQ, be careful as this wasn't the only one used on Jaguar. Title: Re: Series 1 Handbrake pad missing! Post by: angelorange on 09 April, 2009, 06:28:24 AM Great
thanks for the replys will look into it today Title: Re: Series 1 Handbrake pad missing! Post by: angelorange on 10 April, 2009, 09:05:03 AM ???
Pads ordered through a local supplier arrived 4pm yesterday. Alas although they looked identical shape they were approx 5 mm too small in size all around. So E Type / Mk2 Jag ones don't fit. Will try elsewhere..... Title: Re: Series 1 Handbrake pad missing! Post by: lancialulu on 11 April, 2009, 09:35:00 AM Look on ebay - they are often there.
Tim |