Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: Daytonadream on 26 June, 2009, 09:51:49 PM

Title: supplier's contact details for roll hoop for fulvia zagato
Post by: Daytonadream on 26 June, 2009, 09:51:49 PM

Hi,

Can anyone point me in the right direction for a supplier of a roll hoop to fit into my s2 zagato and cost if know.

Have any of you fitted one in your car and  able to offer advice of any kind?

Thank you

Steuart

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: Richard Fridd on 26 June, 2009, 10:21:53 PM

roll centre/safety devices if they are still around?

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: lancialulu on 26 June, 2009, 11:01:34 PM

I suspect OMP who do one for the coupe will fit.

I can check dims when I have my two cars together.

Tim

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: fay66 on 26 June, 2009, 11:40:43 PM

Quote from: Daytonadream on 26 June, 2009, 09:51:49 PM

Hi,

Can anyone point me in the right direction for a supplier of a roll hoop to fit into my s2 zagato and cost if know.

Have any of you fitted one in your car and  able to offer advice of any kind?

Thank you

Steuart

Might be worth checking with Louise & Jason Kennedy as they race a Fulvia Zagato, as well as the Ex David Laver Aurelia B20 GT, see latest issue of Viva Lancia June 2009 page 12 "Squadra Corsa Elfanti Rossi Wins at Mallory Park"

Brian
8227 8)

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: Zagato on 26 June, 2009, 11:55:40 PM

Paul at www.verelancia.com can supply a 6 point roll cage - sadly Euro exchange rate is pretty poor at the moment possibly making his prices look a bit on the steep side
Custom cages are another good firm to try
Safety Devices ended up giving different companies different manufacturers to look after - not sure if anyone covers Lancia
I believe my bespoke cage for my S2 Zagato was designed and fitted by Gartrac - very nice cage but possibly well over the top for anyone just needing a hoop
 

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: Philm on 21 July, 2009, 01:15:48 PM

The roll hoop in the Kennedy's Zagato was hand made by a firm near Bradford. I helped design and fit it!

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: Daytonadream on 21 July, 2009, 08:43:10 PM

Hi Phil,

Thanks for the comment , yes still looking ! so I would welcome the contact details if you still have it.

regards

Steuart

Title: Re: supplier's contact details for roll hoop for fulvia zagato
Post by: angelorange on 05 August, 2009, 08:09:21 PM

Your best bet for a Sport is SASSA roll bar in Italy - they build the best cages for this model.  If it was a coupe then Sparco is much better than OMP. Paul of Vere Lancia installed mine but I bought it direct from Sparco which saved a few Euros!

Sassa probably cheaper in any case.