Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: Daytonadream on 09 August, 2009, 10:17:18 AM



Title: DIPSTICK WANTED FOR 1.6
Post by: Daytonadream on 09 August, 2009, 10:17:18 AM
My dipstick on the 1.6 engine is about to seperate, the metal stick  is coming away from the rubber top.

Need to find a replacement quick before the thin metal bit disappears down to the sump, I was given a stick put I think it from a 1.3 because it's not the same !

Many thanks

Steuart


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: chrislg on 09 August, 2009, 02:06:59 PM
Hi Steuart,

According to my series 2 parts book (which covers both 1.3 and 1.6) there is only one part number for the dip stick, so it should be the same for both the 1.3 and 1.6 engines. The one you were given might be for an earlier 1st series Fulvia which might be different (I cannot say as I din't have a 1st series parts book).

Hope that helps?

Chris


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: Richard Fridd on 09 August, 2009, 02:24:18 PM
 hi ,i have a spare 1.3 dipstick in the garage if you want to try it.you know where i am.give me a ring if you like.


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: ncundy on 09 August, 2009, 02:52:33 PM
There are 4 different part numbers for S1 engines, one of which (1109551) is the same as the S2 part number, for the standard saloon.

The S1 1.6 dipstick is different from the S2 1.6 because of the bigger S1 sump - I don't know the differences between the others.


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: lancialulu on 09 August, 2009, 04:42:01 PM
If I understand correctly Steuart's 1.6 is a series 2 Sport so any series 2 dipstick should do.

Tim


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: fay66 on 09 August, 2009, 07:07:49 PM
My series 1 parts books shows Model 818 540 1.6HF
dipstick part number 1108993 which doesn't appear to be used on any other model.

See Below

Brian
8227 8)


Sorry about the quality, this is the 3rd attempt to improve legibility ::)


Title: Re: DIPSTICK WANTED FOR 1.6
Post by: Daytonadream on 12 August, 2009, 08:50:11 PM
Thank you to all who answered to this post.

Picked up a dipstick from Richard today so it appears the 1.3 and 1.6 are in fact the same item !

Thanks again Richard.

Steuart