|
Title: WANTED bumper quarter for a series one Fulvia Zagato Post by: zagatoman on 29 October, 2009, 07:57:00 PM Hi can anyone help?
Still looking for a good condition rear of-side (drivers side) bumper quarter for a series one Fulvia Zagato. Please contact me on: pwood13660@blueyonder.co.uk if you can please help. (please see pic) Thanks, Paul (http://i46.tinypic.com/2ikxk7m.jpg) (http://i46.tinypic.com/14b3nd3.jpg) (http://i49.tinypic.com/358ea3b.jpg) (http://i47.tinypic.com/dypto5.jpg) Title: Re: WANTED bumper quarter for a series one Fulvia Zagato Post by: Nigel Carine on 03 November, 2009, 11:43:45 AM Hi Paul
I have a full set of stainless steel bumpers. I am not sure what car they came off but they do fit the Zagato. The two rear quater bumpers are in good condition but they have the rubber strips in them which by the look of your picture are not the same as yours. The front has a seriouse bump in it and I cannot find anyone who will fix it. It has the fixing holes for the rubber strip which is missing. I have posted this rather than PM you as I am looking for front and rear series 2 zagato bumpers, mine are like paper doilies. Nigel Title: Re: WANTED bumper quarter for a series one Fulvia Zagato Post by: zagatoman on 03 November, 2009, 05:21:10 PM Hi Nigel
Unfortunately for me, sounds like you have bumpers for a series two Zagato. I am looking for the earlier type with no rubber inserts, and only the drivers side rear quarter. Are they not a suitable replacement for your car if you manage to get the bumper sorted. Is it posable to chrome stainless steel? Good luck, Paul Title: Re: WANTED bumper quarter for a series one Fulvia Zagato Post by: Philm on 03 November, 2009, 08:31:51 PM It is possible to chrome the stainless, it will need to be prepped though just like ferrous steels, cleaned copper plated etc
Title: Re: WANTED bumper quarter for a series one Fulvia Zagato Post by: Dilambdaman on 04 November, 2009, 12:04:15 AM Find a stainless steel catering equipment manufacturer!
Couldn't find a S1 rear bumper for the Fanalone. Used a S1 coupe bumper and had the number plate holes welded up, the mounting brackets attached and the blade polished by a stainless steel catering equipment manufacturer. Not cheap but very effective. Robin. |