Lancia Motor Club

Model Technical and Interest => Aprilia, Ardennes and Ardea => Topic started by: lancialulu on 15 May, 2011, 05:45:29 PM



Title: Aprilia Door lock mechanism
Post by: lancialulu on 15 May, 2011, 05:45:29 PM
Does anyone have an exploded diagram of the Aprilia Drivers door locking mechanism.

In trying to get the lock to work (it does now after a fashion) I found a couple of hair springs (one brocken) around the lock area. I cannot see what they are for. Also found a hair clip type of circlip foating around in that area but again cant see what it does or where it goes.

The parts manual I have is poor resolution and I cannot make out if these items even exist.

Any help on this appreciated.

Tim


Title: Re: Aprilia Door lock mechanism
Post by: lancialulu on 16 May, 2011, 06:39:44 AM
On further examination of the parts book, it may be the my two hairs springs were indeed one  as there is a part 38-492 that looks suspiciously like these bits.

Has any one got one?? Still cant see what it does (did) and the door handle  returns perfectly. I might just have to look at another door.....

Tim


Title: Re: Aprilia Door lock mechanism
Post by: davidwheeler on 20 May, 2011, 08:45:46 PM
You will find photographs on the technical information only thread.