|
Title: Aprilia rear suspension two questions Post by: MaciekPeda on 19 January, 2013, 10:56:09 PM Hi !
I am already put together my Aprilia rear suspension and i have two question related to this assembly: 1. Modern equivalent for rear wheels bearings 2. Did yours know, how repair wrong bearings in links between rear spring and control arms ? Or must i look for better ones ? See picture. Kindly regards Title: Re: Aprilia rear suspension two questions Post by: Parisien on 20 January, 2013, 01:15:10 AM Hope this is of use - see post by bluesky
http://www.lancia.myzen.co.uk/forum/index.php?topic=2928.msg37799#msg37799 P Title: Re: Aprilia rear suspension two questions Post by: BlueSky on 20 January, 2013, 05:08:58 AM The bearing in the spring retainer I think is phosphor bronze bush which could be done in a lathe, don’t know if Cavalitto has them as new.
The wheel bearings for you car, which I seem to remember is 2nd series, shown on the TAV below . 6 = p/no. 48349 is a RIV 4AANO. As far as I can see there is no modern equivalent, maybe a second series owner can help here? 7 = p/no 49054 is a NF205 double row roller bearing which seems to readily available. A modification I did was to fit grease nipples to the parts as shown in the attached photo. Noel Title: Re: Aprilia rear suspension two questions Post by: MaciekPeda on 20 January, 2013, 07:27:42 PM Thank you for any advice !
|