|
Title: 16V Camshafts Post by: GREENYORKIE on 19 April, 2007, 07:44:46 PM I need a pair of camshafts for my sick EVO1.Any offers or advice on the best dealer prices. :(
Title: Re: 16V Camshafts Post by: Turbo_Ie on 11 May, 2007, 12:06:56 AM stock camshafts? if you need stock ones i have apair in verry good condition!
Title: Re: 16V Camshafts Post by: Turbo_Ie on 12 May, 2007, 09:04:28 PM Greenyorky please contact me at Cipinkus@yahoo.com , i've got an mail from the forum that tels me that oyu give me a privet mesage...but i can't read it ???
Title: Re: 16V Camshafts Post by: Turbo_Ie on 12 May, 2007, 09:07:34 PM Greenyorky please contact me at Cipinkus@yahoo.com , i've got an mail from the forum that tels me that oyu give me a privet mesage...but i can't read it ??? this is the mesege i got wen i tried to read my PM An Error Has Occurred! Sorry, you can't read your personal messages Title: Re: 16V Camshafts Post by: GREENYORKIE on 12 May, 2007, 10:28:33 PM Hi,Dont know what went wrong but here goes again.Can you tell me the mileage on the car that your camshafts came off,can you assure me that there is no visible wear on the camshafts and what price would like for the pair delivered to Scotland.Thanks,David.
Title: Re: 16V Camshafts Post by: Turbo_Ie on 13 May, 2007, 12:36:40 AM i have 2 camshafts stock from an engine wich i've bought from a scrapyard in germany,the milege on the car was 120.000~ km , i've bouht that engine because i needed the turbo and pistons,anyway i cand give you also some medium race camsharfts they are ok from 280 to 370 BHP (depends the pressure and the turbo you are using) Aspiration camshaft: 355R Max high: 10,7mm Time to opening: 250° Gioco punteria: 0.40mm Exausth camshaft: 348 Max high: 8.85mm Time to opening: 236° Gioco punteria: 0.50mm, theese camshafts was used approximately 5000 km , then was changet to race model , the price of new for teese camshafts was 700 EUROs~
you thing abauth it and you give me notice and you make me an offer! Title: Re: 16V Camshafts Post by: GREENYORKIE on 16 May, 2007, 08:04:12 PM Thanks for this information.I have managed to source camshafts locally so wont be following up your offer.
Thanks for replying. |