Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: Richard Fridd on 23 October, 2013, 11:06:34 AM



Title: Unusual Front
Post by: Richard Fridd on 23 October, 2013, 11:06:34 AM
A Sport with an unusual grille and the headlamp arrangement similar to some of the USA cars


Title: Re: Unusual Front
Post by: HF_Dave on 23 October, 2013, 05:55:02 PM
It looks kike a good attempt to make the twin headlamp conversion work well  :)


Title: Re: Unusual Front
Post by: stanley sweet on 25 October, 2013, 09:18:16 AM
I like that a lot. Very nice conversion.


Title: Re: Unusual Front
Post by: Richard Fridd on 31 October, 2013, 03:41:37 PM
One withi the cenral part of the grille still in place


Title: Re: Unusual Front
Post by: dannels on 31 October, 2013, 06:49:04 PM
This is vere lancia's twin headlight arrangement
 


Title: Re: Unusual Front
Post by: stanley sweet on 31 October, 2013, 06:51:37 PM
The Vere version is pretty much the same as the Daytona versions.


Title: Re: Unusual Front
Post by: Richard Fridd on 31 October, 2013, 07:04:16 PM
I do like their photos. How are the skins put back on?


Title: Re: Unusual Front
Post by: the.cern on 02 November, 2013, 07:54:53 PM
Richard, that is absolutely superb. I regret that I do not know the answer to your  question, but I am so pleased to see that photograph.

Best wishes,

                     Andy


Title: Re: Unusual Front
Post by: Richard Fridd on 02 November, 2013, 08:31:15 PM
There are a few pics on their website.


Title: Re: Unusual Front
Post by: stanley sweet on 03 November, 2013, 12:31:36 PM
If you just fitted the mechanicals and a seat that would surely be the lightest of Competiziones!


Title: Re: Unusual Front
Post by: phil-m on 04 November, 2013, 06:33:19 PM
I would imagine the skins are clipped on the same way as originally with twisted wire clips brazed to the panel then twisted/clamped around the steel frame.