|
Title: Fulvia Series 1 Dipstick Post by: whitefright on 21 June, 2017, 11:21:45 AM I would be very grateful if someone could tell me the measurement from the max mark to the base of the rubber stop. Mine appears to be a 'moveable feast' Thank you
Title: Re: Fulvia Series 1 Dipstick Post by: cyborg7 on 22 June, 2017, 09:23:38 PM 359mm on mine. But bear in mind that mine's a 1.2L so no idea if for larger engines the level might be different - don't want to mislead you as pretty important to run the right level.
However my dipstick has been crimped on the side to retain the top of the metal cap (to stop it sliding any further up). I guess if you can see or locate this then that could be a more definitive guide to the position for the top of the metal cap. Title: Re: Fulvia Series 1 Dipstick Post by: whitefright on 26 June, 2017, 06:17:36 PM Thank you so much for your reply, you have been a great help. I have now found the crimp you mentioned.
|