|
Title: Rear suspension tools for B10 Post by: williamcorke on 23 October, 2017, 05:20:11 PM Apologies if this is a 'repeat topic'...
I need to dismantle one of the rear hubs on my B10 to replace a bad-feeling bearing (not had it on the road, but you can feel its pain). Does anyone on the forum have a set (pair?) that I can borrow. Or should I go to Omicron? Those of long memory might intuit that I'm making some progress with this very slow rebuild and they'd be right. I might even resurrect the forum thread. Title: Re: Rear suspension tools for B10 Post by: Parisien on 23 October, 2017, 06:13:31 PM Hi Will, please see posts in the link below. Assuming rear hub bearing same all though Aurelia range, part no #48353 RIV 9387C
http://www.lancia.myzen.co.uk/forum/index.php?topic=5254.120 I had enquired on the above thread about club tools but Brian said the club didn't have any, so drawings were supplied and we made our own. If stuck I can mail them to you. P Title: Re: Rear suspension tools for B10 Post by: williamcorke on 24 October, 2017, 08:20:30 AM Thanks Frank,
I think I might get a local engineering shop to make a pair of tools up, as you did. Having read your experience, I'll make sure they start with 'hard' raw materials. Cheers, W Title: Re: Rear suspension tools for B10 Post by: Parisien on 24 October, 2017, 08:39:45 AM Thanks Frank, I think I might get a local engineering shop to make a pair of tools up, as you did. Having read your experience, I'll make sure they start with 'hard' raw materials. Cheers, W No problem, let me know if you need drawings forwarded, and please do kickstart your B10 restoration thread again, always of interest! P |