Lancia Motor Club Forum Banner
27 November, 2024, 04:52:47 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 8.32 fuel pressure regulator  (Read 4414 times)
0 Members and 1 Guest are viewing this topic.
m tulloch
Megaposter
*
Posts: 215



« on: 16 August, 2020, 06:04:31 PM »

Does anyone have any details on the fuel pressure regulator connections on a series 2 8.32, specifically whether there is a vacuum connection onto the plenum? The regulator on mine has a small rubber tube approx. 30mm long which I would have expected to connect to the plenum but it isn't connected to anything.
I have a workshop manual but unhelpfully it is for the series 1 which has a different set up for the plenum connections.

Thanks.
Logged
iom100
Member

Posts: 2


« Reply #1 on: 07 November, 2020, 04:55:38 PM »

I have a Ser 1 and the connections from the Fuel Pressure Sensor are as you describe - there is a short tube capped that goes nowhere.

FYI - Mine has become faulty, if the engine doesnt fire the first time the the regulator sticks and you have to wait an hour or tap it with a hammer !! and they are a fortune - but i am going to bite the bullet and get a new one.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.03 seconds with 20 queries.