Lancia Motor Club Forum Banner
22 December, 2024, 01:39:00 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Lancia Motor Club > Buy, Sell and Search > Spares for sale > Rear shockabsorbers - what are they for?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Rear shockabsorbers - what are they for?  (Read 3935 times)
0 Members and 1 Guest are viewing this topic.
roddy
Senior Member
*****
Posts: 188
« on: 15 October, 2009, 02:27:18 PM »
Many years ago I got these new shockabsorbers as a job-lot of Fulvia parts.   They are not for a Fulvia (nor I presume a Flavia).   What are they for?

Stamped into the body is :-  TIPO 50.02023   ANT   04 CN   One has 56410, the other 56372

Eyelets take 8mm bolts, and centres are 345mm apart.

Thank you for your help

Roddy
Logged
Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
fay66
Permanent resident
**
Posts: 6233
« Reply #1 on: 15 October, 2009, 05:02:33 PM »
Quote from: roddy on 15 October, 2009, 02:27:18 PM
Many years ago I got these new shockabsorbers as a job-lot of Fulvia parts.   They are not for a Fulvia (nor I presume a Flavia).   What are they for?

Stamped into the body is :-  TIPO 50.02023   ANT   04 CN   One has 56410, the other 56372

Eyelets take 8mm bolts, and centres are 345mm apart.

Thank you for your help

Roddy

Hi Roddy,
another pair looking very similar are currently for sale on Ebay http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=390024565162&ssPageName=STRK:MEWAX:IT

But they have a Lancia part number and are marked as 818.100 - Rears for Fulvia Berlina.


Brian
8227 Cool
Logged
Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
roddy
Senior Member
*****
Posts: 188
« Reply #2 on: 15 October, 2009, 07:54:52 PM »
Hello Brian - Thank you for the information.   Yes, they do look similar.   My experience is limited to coupé/Sport units which usually have an off-set eyelet at the bottom.   Also they are at maximum expansion at 345mm eyelet centre to centre, which is considerably shorter than a coupé/Sport needs.   Perhaps the S1 saloon, with the lower ride height, just needs shorter units.   You don't fancy having a crawl under FAY with a tape measure, do you???   (Might be to your advantage, as I was about to dump them!)

Kind regards - Roddy
Logged
Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
fay66
Permanent resident
**
Posts: 6233
« Reply #3 on: 15 October, 2009, 10:13:04 PM »
Quote from: roddy on 15 October, 2009, 07:54:52 PM
Hello Brian - Thank you for the information.   Yes, they do look similar.   My experience is limited to coupé/Sport units which usually have an off-set eyelet at the bottom.   Also they are at maximum expansion at 345mm eyelet centre to centre, which is considerably shorter than a coupé/Sport needs.   Perhaps the S1 saloon, with the lower ride height, just needs shorter units.   You don't fancy having a crawl under FAY with a tape measure, do you???   (Might be to your advantage, as I was about to dump them!)

Kind regards - Roddy

Hello Roddy,
I'm taking "Fay" out for a run over the weekend complete with tape measure Cheesy and I shall have a look.
Is it possible that the number stamped on the body 56372 might be 52372? as I've found a reference under shock absorbers to 52372.
I'd hoped the technical section of the manual would give open & closed lengths of them, but it only gives values for testing on special equipment.

Best Regards
Brian
8227 Cool
Logged
Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
roddy
Senior Member
*****
Posts: 188
« Reply #4 on: 23 October, 2009, 07:49:37 PM »
The shock absorbers were identified;  and have now been sold.

Thank you for your interest.

Regards - Roddy
Logged
Roddy Young
Dunfermline, Fife

1970 Fulvia Sport S1 1.3S
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.046 seconds with 20 queries.