Lancia Motor Club Forum Banner
25 November, 2024, 06:56:14 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Gearbox trouble - 2nd gear  (Read 2703 times)
0 Members and 1 Guest are viewing this topic.
Nick Longman
Lapsed
Member
**
Posts: 14


« on: 28 May, 2012, 06:40:48 PM »

My series 2 has a slightly unhappy gearbox which I have lived with for a bit but am at the point i'd like to get properly sorted.

2nd gear can be tricky to engage when cold, but gets better once warm.  It also jumps out of gear when on the overrun.  So coming up to a junction, select second, then decelerate and more often than not it will jump back into neutral.  I've got used to it by either anticipating it and quickly re-selecting 2nd or just using 3rd!

I'm assuming that it needs to go to a specialist to get sorted, unless anyone is aware of this being a common, easily fixed issue.  Any recommendations?

Thanks,  Nick.
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5043



« Reply #1 on: 28 May, 2012, 07:42:36 PM »

The other alternative is to put a call out for a replacement box - 1.3 gearboxes are reasonably available and not too much money compared to labour charges on a box rebuild.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
angelorange
Megaposter
*
Posts: 324



WWW
« Reply #2 on: 28 May, 2012, 10:16:08 PM »

There are legends about 5 speed boxes being un-burstable - but I have to say (and I have experience with 6 off all the types) they are 40+yrs old and you don't know until you strip one down what the issues really are. The last one fitted split it's bell housing with a pinion/FD issue pre CSCC Silverston just off the M1 !

Some have been run on too little oil - bearing and hub wear, others have had input shaft ot selector fork issues, then there is the worn synchros (mostly on the pinion gears - gear bevels are fine but many wear out synchros that are attached).

I thoroughly recommend you chat with Tony Wilson (who has built racing Hewland gear boxes for some 40 years) - he has 3 of mine at present and is well known to Martin Cliffe of Omicron.

Probably can source correct 2nd gear and hub if required.



TONY WILSON
For Service to Racing Car Transmissions.
HEWLAND Specialist.
Postal address - 43 Hawthorne Ave, Long Eaton,
Nottingham, ENGLAND. NG10 3NG
Workshop address - Unit 2, Wood Court, Clifton Avenue
Long Eaton, Nottingham, ENGLAND NG10 2GA
Telephone: +44 (0)115 946 1013 Answerphone & Autofax
Mobile: 07740 123119 (text message is good first point of contact)
e-mail:tonywilson43@gmail.com



* _0018991.jpg (71.48 KB, 480x640 - viewed 395 times.)
Logged

I'm entitled to my ignorance!
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.138 seconds with 21 queries.