Lancia Motor Club Forum Banner
22 December, 2024, 11:55:16 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Lancia Motor Club > Model Technical and Interest > Flavia > 1970 Flavia Coupe 2000 Heater control Vlave
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: 1970 Flavia Coupe 2000 Heater control Vlave  (Read 4934 times)
0 Members and 1 Guest are viewing this topic.
msh2908
Member
****
Posts: 85
« on: 17 November, 2019, 10:08:36 PM »
Had the car out this morning and couldn’t get any heat into the cabin.  Removed the heater control valve/switch on top of heater matrix and it was completely blocked with gunk.  I've removed it, cleaned it and put it back but as suspected the rubber inside the unit is shot and is leaking.  Does anyone know if these units are available?

Regards

Mark
Logged
rogerelias
Rebel Poster
*
Posts: 955


MY 1600HF IN HEARTBEAT GARAGE
« Reply #1 on: 17 November, 2019, 10:21:01 PM »
Hi Mark, try the Flavia and 2000 consortium, msg Colin Clamp, or no joy Omicron
Logged
FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059
« Reply #2 on: 18 November, 2019, 11:02:48 AM »
While you are at it you may find the heater matrix is blocked. Ideal time to give it a good flush out with a hose ....

I believe Omicron sell the rubber diaphragm. This is much cheaper than a replacement valve (available it Italy).
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
msh2908
Member
****
Posts: 85
« Reply #3 on: 18 November, 2019, 09:52:49 PM »
Quote from: lancialulu on 18 November, 2019, 11:02:48 AM
While you are at it you may find the heater matrix is blocked. Ideal time to give it a good flush out with a hose ....

I believe Omicron sell the rubber diaphragm. This is much cheaper than a replacement valve (available it Italy).

Thanks guys. Spoke with the guys in Norfolk and they do have a diaphram  - its from a Fulvia mk1 apparently, so hopefully this will do the trick.

Mark
Logged
simonandjuliet
Permanent resident
**
Posts: 2559
« Reply #4 on: 19 November, 2019, 02:09:06 PM »
I wanted the heater to work in the new Fulvia GT and have just done the job 

The problem was the original diaphragm had swelled and could not be unseated - see photo. Quick and simple job if it all comes apart

ps can you post the Omicron price for the diaphragm please ? (I only had one in stock so will need to replace it)

Final picture shows the rebuilt unit next to a plastic replacement unit, but the pipes are a slightly bigger diametre so would need a slight mod

* IMG_2964.jpeg (154.46 KB, 1280x960 - viewed 459 times.)

* IMG_2965.jpeg (160.12 KB, 1280x960 - viewed 422 times.)

* IMG_2966.jpeg (199.27 KB, 1280x960 - viewed 433 times.)
Logged
AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
msh2908
Member
****
Posts: 85
« Reply #5 on: 23 November, 2019, 02:30:40 PM »
Quote from: simonandjuliet on 19 November, 2019, 02:09:06 PM
I wanted the heater to work in the new Fulvia GT and have just done the job 

The problem was the original diaphragm had swelled and could not be unseated - see photo. Quick and simple job if it all comes apart

ps can you post the Omicron price for the diaphragm please ? (I only had one in stock so will need to replace it)

Final picture shows the rebuilt unit next to a plastic replacement unit, but the pipes are a slightly bigger diametre so would need a slight mod

The cost for the diaphram was £21 +postage - its a bit steep but what is the alternative?
Logged
lancianut666
Permanent resident
**
Posts: 1786


Slow but rough
« Reply #6 on: 29 November, 2019, 04:23:06 PM »
Looks very similar to an Appia one...I'm not charging enough!
Clarkey
Logged
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.04 seconds with 21 queries.