Monte Carlo seat adjusters

Dikappa

Megaposter

Posts: 556

« on: 08 September, 2021, 06:43:03 PM »

Guys, trying to help a friend here in Belgium.

He is restoring a Monte Carlo series II, and is need need of seat adjusters (I thought only one seat was adjustable, and the passenger one fixed, or did that change with the second series?)
Is there a solution for repair or does anyone have spares available?

Many thanks,

Koen


	Logged

neil-yaj396

Committee
Permanent resident

Posts: 1266

Re: Monte Carlo seat adjusters

« Reply #1 on: 09 September, 2021, 07:36:59 AM »

Monte Hospital and the Consortium Forum might be worth a try?


	Logged

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo

A1.6HPE

Senior Member

Posts: 122

Re: Monte Carlo seat adjusters

« Reply #2 on: 09 September, 2021, 08:33:10 PM »

Hello Koen,
I assume you are talking about the control arms for the reclining feature. My Series 2 car has adjusters on both seats, I am sure that all Montecarlos did. If they are bent (as is common) then that is a big problem. Mine had seized up and I managed to dismantle them by carefully drilling a small hole in the plastic shroud so that I could push out the split-pin that holds the arm to the threaded part. I was then able to clean up the threaded part and the mounting part so that the arms rotate again.

Leo
Edit: The adjusters are not "handed" so any unit can be fitted to any seat.


« Last Edit: 09 September, 2021, 08:52:20 PM by A1.6HPE »	Logged

Edinburgh Regional Co-Ordinator

Pages: [1] Go Up

« previous next »

	Author	Topic: Monte Carlo seat adjusters (Read 2086 times)
0 Members and 1 Guest are viewing this topic.