Lancia Motor Club Forum Banner
30 November, 2024, 04:31:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Lancia Motor Club > Model Technical and Interest > Fulvia > Part numbers for Ducellier ignition bits?
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Part numbers for Ducellier ignition bits?  (Read 6985 times)
0 Members and 1 Guest are viewing this topic.
zagatoman
Lapsed
Senior Member
*****
Posts: 198


Looking a lot better
« on: 26 August, 2010, 10:12:17 AM »
Hi all, just want to pick your brains again.

Can anyone please supply me with part numbers for Ducellier ignition bits for a 1968 Fulvia Zagato 1300cc

Points
Condenser
Rotor arm
Cap.

Alternatively, has anyone got a Marelli distributor for a 1300cc Fulvia Sport Zagato they don’t want?


   

Thanks, Paul
Logged
Series 1, 1.3 Fulvia Zagato 1969
lancialulu
Press Officer
Permanent resident
*****
Posts: 5047
« Reply #1 on: 26 August, 2010, 02:15:35 PM »
You could check for a Luminition convertion....

Tim
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
zagatoman
Lapsed
Senior Member
*****
Posts: 198


Looking a lot better
« Reply #2 on: 26 August, 2010, 06:19:28 PM »
Hi Tim,

Funds are short so will have to go with the Marelli distributor if I cant get the Ducellier ignition bits.

Would be nice though.

Paul
Logged
Series 1, 1.3 Fulvia Zagato 1969
nistri
Megaposter
*
Posts: 564
« Reply #3 on: 27 August, 2010, 06:57:26 AM »
I might have a new Ducellier distributor among my spares. I will check it at the weekend and will let you know if available. Regards, Andrea
Logged
Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
zagatoman
Lapsed
Senior Member
*****
Posts: 198


Looking a lot better
« Reply #4 on: 27 August, 2010, 11:54:30 AM »
Hi Andrea,

thanks for the offering to look for the Ducellier distributor, I actually need a Marelli distributor. The problem is I cant find ignition parts for my car with the Ducellier distributor so have decided to fit a Marelli distributor that I can get parts for.

I would still like to use my Ducellier distributor, would you have and ignition parts for this?

Thanks again, Paul
Logged
Series 1, 1.3 Fulvia Zagato 1969
nistri
Megaposter
*
Posts: 564
« Reply #5 on: 30 August, 2010, 11:00:54 AM »
Hi Paul,
I do have a Ducellier distributor complete but used and in good conditions. I can send you a couple of photos if you give me your e-mail address (they are quite large). The type of Ducellier I have is 4206A. I am not sure what the exact problem with your distributor is (apart from scarcity of spares). Nonetheless, I think that the same distributor was fitted to a range of French cars of the 60s. Have you tried to cross reference it to Renault and Peugeot? From distant memory, I think this one uses a rotor arm which was very similar to the one of my Renault 12.
Marelli distributors: with four Fulvias at home I regrettably cannot risk parting with any.
Best regards, Andrea
Logged
Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Nigel Carine
Lapsed
Member
*
Posts: 8
« Reply #6 on: 31 August, 2010, 03:18:50 PM »
Hello Paul
To take Andrea's idea a bit further< I run an Alpine Renault and have no problems getting bits for the Ducellier. Try a firm called Meca Parts (good website) or GBS (not so good), both Renault dedicated.. You will need the number on the side of the dizzy and they are French so postage will be heavy but worth a try if you're desperate.

Nigel
Logged
lanciab20
President
Member
*****
Posts: 44
« Reply #7 on: 06 September, 2010, 04:02:25 PM »
Have you tried
http://www.ignitioncarparts.co.uk?
They do some Beta stuff, Dedra, A112, Thema, nothing listed for Fulvia but they might be able to get you a number.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.05 seconds with 21 queries.