Lancia Motor Club Forum Banner
27 December, 2024, 10:59:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Gearbox  (Read 3281 times)
0 Members and 1 Guest are viewing this topic.
davidwheeler
Permanent resident
**
Posts: 1487



« on: 24 February, 2009, 11:05:16 AM »

My Aprilia gearbox routinely jumped out of third gear.  Replacing the bearings and thus reducing the endfloat has greatly reduced this.  Both my Lambda gearboxes fall out of third gear despite new bearings.  The layshaft has adjustments at each end by which endfloat and fore-and-aft position can be altered.  What are the correct settings?
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
casarokardo
Member
*
Posts: 7


« Reply #1 on: 18 September, 2011, 06:09:58 PM »

Came across David's old post on this subject, with no comments. I had the same trouble for about 20 years, then found that the small coil spring that holds 3rd gear in place had collapsed. I'll let you know in due course if the problem is solved with the new spring I've installed (once I get my sparks back).

Jonathan R
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.06 seconds with 21 queries.