Lancia Motor Club Forum Banner
22 December, 2024, 11:24:53 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: 1300 Deltas and unleaded  (Read 7251 times)
0 Members and 1 Guest are viewing this topic.
fensaddler
Lapsed
Permanent resident
**
Posts: 1082



« on: 10 April, 2007, 10:06:33 PM »

Please see my questions on the thread below, in members information relating to Nick Haigh's VL article this month.  Relevant chunk also posted for non-members to read.

http://www.lancia.myzen.co.uk/forum/index.php?topic=590.0

However, what did get me thinking was your comment about 1300s on unleaded.  According to your article, post 431170 chassis no on the 1300 is OK on unleaded - unfortunately mines an 88 (August, on the F plate), with a chassis number 416xxx - which rather suggests I need to do something other than run unleaded.

So, all of you out there, I need some advice, as follows:

1.  Can you confirm that it is only post 431170 1300s which are unleaded safe (I had been assured mine was) - I've no reason to doubt Nick, he knows his stuff, but I'd like to be doubly sure   ?

2.  If this is so, what should I be doing (only perhaps 1000 miles a year, but much of it on motorway getting to and from events, and hell, you can't but rev them...) - I've been using super unleaded routinely, but am I still risking valve seat recession?  In which case an additive like valvemaster would seem appropriate?

3.  If I do need to protect my valves, the cost of work on the head to fit hardened seats will be quite significant on top of the £2k bill I'm already currently expecting for ongoing work.  Its likely to be much easier and cheaper to source a head from another, later car - but will it fit straight on?
Logged

Chris Owen
13245
1987 Delta 1.3LX
2012 Skoda Yeti 112TSi 4WD
deltanick1300
Guest
« Reply #1 on: 08 May, 2007, 10:04:47 PM »

Hi Chris

Bit slow but I've just noticed the response to my Delta article in VL! I've posted some stuff at the original location - hope it helps...?

Cheers

Nick
Logged
inthedark
Guest
« Reply #2 on: 09 May, 2007, 05:32:08 PM »

Chris,
if you not sure, have a chat to Guy Croft or visit his forum (Guycroftraceengines) there's lots of info
there.
I have to be honest I run my Gamma on normal unleaded - no additives and a 1978 motor and as yet
9000 miles and no problems and as you probably know I don't hang about.

Geoff 'the colonel'
Logged
Rodders
Guest
« Reply #3 on: 10 May, 2007, 07:43:39 AM »

Ditto for my '77 and '81 Montecarlos, which I've been feeding super unleaded for several years now with nary a problem (so far and touch wood!)

Rodders
Logged
REDLANCIA
Lapsed
Member
**
Posts: 11



WWW
« Reply #4 on: 10 May, 2007, 07:51:09 AM »

I use Castrol Valve Master Plus in my Montecarlo, better safe than sorry I always say Wink

Nick.
Logged

1982 Lancia Montecarlo Series Two Spider
1999 Alfa Romeo 2.0 T Spark Spider
1999 Mercedes Benz C240 Sport Estate
Rodders
Guest
« Reply #5 on: 10 May, 2007, 08:47:28 AM »

...well you always were one to pamper the little sweetheart!

Rodders
Logged
REDLANCIA
Lapsed
Member
**
Posts: 11



WWW
« Reply #6 on: 10 May, 2007, 11:18:43 AM »

True, Grace says I should have married the Monte in 2001 as I seem to spend more time with it than her!  Wink

Logged

1982 Lancia Montecarlo Series Two Spider
1999 Alfa Romeo 2.0 T Spark Spider
1999 Mercedes Benz C240 Sport Estate
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.052 seconds with 21 queries.