Lancia Motor Club Forum Banner
27 December, 2024, 12:08:55 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Distributor brushes  (Read 3265 times)
0 Members and 1 Guest are viewing this topic.
davidwheeler
Permanent resident
**
Posts: 1487



« on: 16 May, 2009, 06:56:23 AM »

For years I have had trouble with the brush plating carbon onto the inside of the distributor cap.  I have made a variety of brushes from various sources but with no great difference in this problem.  I had hoped that the new caps from the Consortium would solve the problem but no luck.  Does anyone else have this difficulty or a cure for it?
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
davidwheeler
Permanent resident
**
Posts: 1487



« Reply #1 on: 28 November, 2013, 11:31:34 AM »

Gosh, long time no see.   No resolution to this problem for me, perhaps someone else has solved it in the interval?  Went out in Old Boot yesterday and had to clean inside the distributor cap to get her going and again after a few miles.  Brushes are not listed in the Consortium spares list so we make our own but from what?
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.047 seconds with 21 queries.