Lancia Motor Club Forum Banner
21 December, 2024, 05:43:17 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fuel pressure and flow rate  (Read 5183 times)
0 Members and 1 Guest are viewing this topic.
BlueKSO
Member
****
Posts: 56

63 Flavia Coupe


« on: 27 March, 2018, 02:46:42 PM »

Re: 1963 Flavia Coupe ( originally 1500cc but now 1800cc )

Hi folks,

Just wondered if anyone knows the delivery pressure of the boot mounted fuel pump and the subsequent flow rate, ltrs / hr  to the Filter King pressure filter in the engine compartment.

This query has nothing to do with the increase in cc as this was carried out some time ago and the engine runs well as it is.

Cheers,  Peter

Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #1 on: 27 March, 2018, 04:19:13 PM »

measure after the filterking. pressure should c around 3psi for carb without return. Too much and the needle valve will rapidly wear out and lead to flooding running rich etc.... If you have 3psi I think there will be enough fuel delivery - check at various throttle settings. I did some experiments a while back on a Fulvia and could not detect any loss of performance on normal running around even when then pressure was turned down to 1 psi.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
brian
Megaposter
*
Posts: 289


« Reply #2 on: 28 March, 2018, 12:17:32 PM »

Eureka moment!
My Sport has suffered with a bit of rough idling and troubles starting when hot. I read this thread and wondered if it could be related and what my pump delivered. Pump has a part number so I checked on-line with the manufacturer and it delivers 6-8psi. I have spoken to them and they have a Bosch pump rated 3-3.5psi which they have on offer at £9.90 delivered. Must be worth a shot. Failing this, there is a pressure control valve at £56 which can do pressures down to 1psi. Watch this space............
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
DavidLaver
Permanent resident
**
Posts: 4388



« Reply #3 on: 28 March, 2018, 01:32:32 PM »


Brian - maybe also check the float valve(s)?
Logged

David Laver, Lewisham.
brian
Megaposter
*
Posts: 289


« Reply #4 on: 28 March, 2018, 05:11:22 PM »

David - Good idea. Thanks for prompt.
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
BlueKSO
Member
****
Posts: 56

63 Flavia Coupe


« Reply #5 on: 31 March, 2018, 07:39:34 PM »

Hi All,

Just to clarify my initial posting.  I’m looking to buy a new fuel pump and I just need to make sure that the pumps that I’m considering, with quoted delivery pressures and flow rates, match the original specifications.
The Filter King can take care of the delivery to the carbs.

Cheers,  Peter
Logged
rogerelias
Rebel Poster
*
Posts: 955


MY 1600HF IN HEARTBEAT GARAGE


« Reply #6 on: 01 April, 2018, 09:59:46 PM »

Hi, if it helps i am running a facet road going pump through a filter king on my Fulvia HF, and set the fuel pressure to manufacturers spec, and it works fine.
Logged

FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
BlueKSO
Member
****
Posts: 56

63 Flavia Coupe


« Reply #7 on: 02 April, 2018, 01:23:27 PM »

Many thanks all, think I know which direction I’m going in.

Cheers,  Peter
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.058 seconds with 21 queries.