Lancia Motor Club Forum Banner
21 December, 2024, 06:12:01 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Petrol Cap  (Read 14050 times)
0 Members and 2 Guests are viewing this topic.
colinw
Member
****
Posts: 84


« on: 06 June, 2018, 09:08:34 PM »

The rubber seal on the inside of my original petrol cap has become guey and shiny and peels away easily. Is this the end of the life of the cap? Or can it be fitted with a new seal? If a new cap is now needed are they easily obtainable?
Thanks you for any help,on this topic.
Logged
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #1 on: 06 June, 2018, 09:25:17 PM »

My Flavia coupe failed the MOT on the petrol cap rubber seal....somewhere in the Viva Lancia was an article showing how to dismantle the cap and replace the seal
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #2 on: 07 June, 2018, 06:20:27 AM »

The rubber seal on the inside of my original petrol cap has become guey and shiny and peels away easily. Is this the end of the life of the cap? Or can it be fitted with a new seal? If a new cap is now needed are they easily obtainable?
Thanks you for any help,on this topic.
v difficult to replace the rubber. I too remember seeing an article in VL but not sure if it was for the early Flavia type. New ones (old stock) were available at the Padova show last year if you looked hard but at a price. I bought one as my Vignale cap was going goey too.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Brian Long
Senior Member
*****
Posts: 122

Aurelia B12, Flavia 2000 Coupe


« Reply #3 on: 08 June, 2018, 07:18:07 AM »

I believe it is possible to rebuild the petrol cap if you have access to a lathe to make a new cental retaining stud.
Brian
Logged
DavidLaver
Permanent resident
**
Posts: 4388



« Reply #4 on: 08 June, 2018, 09:45:15 AM »


Is this another case of "modern fuel, rubber doesn't cope" or just age?
Logged

David Laver, Lewisham.
chriswgawne
Permanent resident
**
Posts: 2090



« Reply #5 on: 08 June, 2018, 10:51:21 AM »

Any chance of a photo as its possible I have one squirrelled away.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
colinw
Member
****
Posts: 84


« Reply #6 on: 10 June, 2018, 09:34:41 PM »

Thank you to all for your help.
The people in Norfolk I have learned can refurbish the cap with 3mm thick nitrile rubber for about £30. The secret is as many of you have pointed out is the re-riveting of the brass stud and spring assembly. This they say they can do.
My car has been standing for 13 years or so with little use so constant exposure only to petrol fumes has not helped. I suppose a little oil on the rubber would keep the newer petrol and its additives away from the (wait for it) perishing rubber!
Thanks again for the help.
 
Logged
lancianut666
Permanent resident
**
Posts: 1781


Slow but rough


« Reply #7 on: 10 June, 2018, 10:00:32 PM »

Found the article...
Clarkey


* DSCN2889.JPG (684.77 KB, 2272x1704 - viewed 488 times.)

* DSCN2890.JPG (656.63 KB, 2272x1704 - viewed 458 times.)

* DSCN2893.JPG (768.35 KB, 2272x1704 - viewed 483 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Richard Fridd
Permanent resident
**
Posts: 3490



« Reply #8 on: 11 June, 2018, 12:48:16 PM »

I have this cap in my store, which can be disassembled. Not sure which model it would fit. Not Flaminia though


* cap.jpg (1076.5 KB, 2560x1920 - viewed 588 times.)

* cap2.jpg (1061.01 KB, 2560x1920 - viewed 487 times.)
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
Neil
Permanent resident
**
Posts: 1318



« Reply #9 on: 11 June, 2018, 12:57:09 PM »

38 litre is Fulvia (S2), may fit Flavias too.
Logged

Neil   
386

1973 Fulvia S2 1.3
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #10 on: 11 June, 2018, 02:53:46 PM »

Flavia 815's are screw not bayonet.

Re Omicron - 3mm is rather thick?
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
chriswgawne
Permanent resident
**
Posts: 2090



« Reply #11 on: 11 June, 2018, 07:28:16 PM »

That's a Fulvia Richard.
I offered Colin what I had which I think is Aurelia B20 S1/2 (Photos attached)?
He has decided to go to Omicron.
 I am quite surprised Lancia didn't use Fulvia and Flavia commonality/
Chris


* Aurelia fuel cap20180608_162719.jpg (471.21 KB, 2016x1512 - viewed 469 times.)

* Aurelia fuel cap20180608_162727.jpg (488.24 KB, 2016x1512 - viewed 527 times.)
Logged

Chris Gawne
Mobile: 07778 216552
bobhenry999
Megaposter
*
Posts: 350


« Reply #12 on: 08 August, 2018, 08:40:10 PM »

Chaps,

I sent my cap to Omicron last week as the seal had also gone all gooey, and as Colin had suggested that it would cost about £30.00 thought nothing of it.


Be warned,  It arrived back today all repaired with a new seal and a bill for £137.72 !

Bob

Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
colinw
Member
****
Posts: 84


« Reply #13 on: 08 August, 2018, 10:09:37 PM »

Wow!!
I was told that the nitrile rubber was about £5-6 and that a new centre “rivet”would be made and peened over. How the cost can escalate like this I do not know.
Bob, so sorry to hear this tale.
Colin


Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #14 on: 09 August, 2018, 06:56:48 AM »

Seems the new one I bought at Padova last year for 120eu was a bargain then! Didn't feel like that at the time....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.049 seconds with 21 queries.