Lancia Motor Club Forum Banner
26 November, 2024, 02:18:08 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Steering box - replace SAE 90 oil with steering lube (Penrite)  (Read 4175 times)
0 Members and 1 Guest are viewing this topic.
prg39
Member

Posts: 3


« on: 22 February, 2020, 02:50:21 AM »

I'm looking to put my 1600 HF back on the road this year. The steering box will need to be put back but before I do I'm thinking of changing from using SAE/GX 90 oil (as per the S2 Instruction Book) to (Penrite) steering box lube to eliminate the leaking oil when using SAE/GX 90 . Has anyonelse done this and if so what affect does it have on steering feel, etc.
Thanks.


* IMG_0812.JPG (1118.78 KB, 1980x1876 - viewed 333 times.)

* IMG_0809.JPG (944.75 KB, 2016x1512 - viewed 336 times.)
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5043



« Reply #1 on: 22 February, 2020, 06:47:05 AM »

Change both seals and continue to use oil. I go up to sae140ep
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
JohnMillham
Lapsed
Permanent resident
**
Posts: 1045



« Reply #2 on: 22 February, 2020, 08:54:44 AM »

I use the Penrite oil and it works perfectly. It prevents leaks and has no detrimental effects. The only problem with it is getting it in through the tiny hole provided in the Lambda steering box. It needs to be warmed up to make it fluid enough! Once in, it stays there.
Logged
Mikenoangelo
Megaposter
*
Posts: 464


« Reply #3 on: 22 February, 2020, 10:24:56 AM »

I can't comment on Lancia steering boxes but beware, some steering boxes are designed for use with oil which can flow through holes, grooves and channels. my Salmsoin being one such. If it is greased, parts such as the bush and shaft for the worm wheel which carries the drop arm don't get lubricated and wear out. Better a slight leak than a worn out part.

Mike
Logged
chriswgawne
Permanent resident
**
Posts: 2083



« Reply #4 on: 23 February, 2020, 10:39:56 AM »

Agreed. It's the same with the pot joints on Aurelias. They were designed to use oil with internal drillings to ensure the oil gets everywhere, particularly to the rubbing surfaces however some so called experts use a CV joint grease which won't leak if the rubber boot cracks but which won't pass through the small holes.Get
Regarding steering boxes, replacement of oil seals is usually straightforward and effective as long as the bearings are ok.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Richard Fridd
Permanent resident
**
Posts: 3484



« Reply #5 on: 27 February, 2020, 07:56:36 AM »

I have used this in the past


* landrover%20grease.jpg (1301.73 KB, 2560x1920 - viewed 320 times.)
Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
prg39
Member

Posts: 3


« Reply #6 on: 29 March, 2020, 01:38:02 AM »

Thanks all for your replies.
I'll use the Penrite lube, possibly using a gear lube pump and some heat to get it into the steering box.
Logged
chriswgawne
Permanent resident
**
Posts: 2083



« Reply #7 on: 29 March, 2020, 09:10:37 AM »

I have the highest regard for Lancia's design and engineering, certainly up to the early 70's so if they say oil, then I use oil although not necessarily of exactly the same viscosity as originally specified.
Chris 
Logged

Chris Gawne
Mobile: 07778 216552
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.104 seconds with 21 queries.