Fulvia accelerator roller bearings

[Justin McArdle]

I need to change the two nylon wheels behind the accelerator pedal as they expand on hot days and the pedal sticks.
What size roller bearings are required as replacements.
Thanks

[D5177_55A]

626 bearings. 6mm wide; 19mm outer diameter. 6mm ‘hole’. Don’t forget to ‘hand-bend’ the channel back to shape as well.


https://www.bearing-king.co.uk/bearing/626-2rsh-skf-sealed-deep-groove-ball-bearing-6mm-bore/3569

[my69S1]

Also these.  Same size.

https://www.bearing-king.co.uk/bearing/626-2z-skf-shielded-deep-groove-ball-bearing-6mm-bore/3570

[Justin McArdle]

Thanks everyone

[fay66]

Thanks everyone

Justin you notice the difference!
Brian
8227

[robupton]

Good timing! I was just looking at my accelerator pedal yesterday and wondering why it was flopping around. I thought something must be missing and I guess it must be those bearings!

A related question - at the  other end of the throttle cable my cable goes around the 'post' and is secured in a temporary looking way. How is the engine end of the cable supposed to attach?

[lancialulu]

Good timing! I was just looking at my accelerator pedal yesterday and wondering why it was flopping around. I thought something must be missing and I guess it must be those bearings!

A related question - at the  other end of the throttle cable my cable goes around the 'post' and is secured in a temporary looking way. How is the engine end of the cable supposed to attach?

Original equipment had a “rubber” bush. These ball bearings replace those.

On the question off throttle cable depends the the midel if car….