Lancia Motor Club Forum Banner
29 November, 2024, 07:13:25 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Appia power loss on motorway  (Read 8088 times)
0 Members and 1 Guest are viewing this topic.
will
Senior Member
*****
Posts: 114



« Reply #15 on: 11 September, 2021, 03:55:58 PM »

I agree with Charles 'It sounds like fuel vaporisation' I have a electric pump in parallel to mechanical pump on my Appia I just use it to start the car. Recently I have had similar symptoms on hot days with my Appia. I have used the same fuel pump set up  on the B20 and was stuck on the M25 for over an hour the car never missed a bit. 
Logged

Aurelia B20 4th Series Appia 2nd Series  Kappa Coupe 3.0 24v V6
Jaydub
Megaposter
*
Posts: 346


« Reply #16 on: 12 September, 2021, 10:19:41 AM »

If it only happens on a prolonged run it points to a blocked fuel line so that the pump can`t maintain the full flow of fuel to the carbs under high demand. You normally get vaporisation while stationary or moving slowly due to less airflow/cooling under the bonnet.
Logged

1600 HF. S2.
Richard Fridd
Permanent resident
**
Posts: 3487



« Reply #17 on: 12 September, 2021, 11:35:50 AM »

I also had an electric fuel pump go bad 3 years ago - symptoms were erratic. Carb ran out of fuel, then everything was fine for an hour, or a day! After checking everything else, only the pump remained as a possible cause (it was however still making all the right noises!).
After changing it for a new one, problem was solved. Since then I have put two electric pumps in parallel and can switch from one to the other. On that Lancia there is no mechanical pump!

Sounds a good idea. Do you have photo of how your parallel pumps are mounted, as I have seen some professional looking brackets/ banjo type fittings for cylindrical style twin pumps.

Richard
« Last Edit: 12 September, 2021, 02:31:03 PM by peteracs » Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
will
Senior Member
*****
Posts: 114



« Reply #18 on: 13 September, 2021, 08:36:29 AM »

On the Appia I used a bracket from a BMC car but you can buy https://www.ahspares.co.uk/austin-healey/performance-parts/fuel-boot/double-su-pump-fitting-kit.aspx?gclid=eaiaiqobchmipiu9wcl78givbovtch0hiaqueaqyaiabeglenpd_bwe

For many years I used a SU pump from the scrapped BMC car mounted in front of the radiator where it keeps cool with two T pieces either side of the fuel pump so that the electric pump is in parallel.  On the Aurelia there is a facet pump that bolts on to the inner wing in front of the radiator.
Logged

Aurelia B20 4th Series Appia 2nd Series  Kappa Coupe 3.0 24v V6
GeoffJohnson
Member
***
Posts: 45


« Reply #19 on: 13 September, 2021, 12:35:09 PM »

Hi Richard
Sorry, I'm late to the party here. I had a similar problem on my Fulvia some while ago. On an SU pump under the cap are a pair of make and break electrical contacts and these required adjustment. They were causing the pump to get hot and vapourise the fuel.Replacement contacts were available from SU (as are pumps , but pricey).

Geoff Johnson


* IMG_0002a.JPG (389.3 KB, 1824x1368 - viewed 221 times.)
Logged
chriswgawne
Permanent resident
**
Posts: 2084



« Reply #20 on: 13 September, 2021, 04:57:46 PM »

Sounds like fuel starvation to me tbh. Maybe a blocked filter in the tank? Alternatively the pump may not be pumping enough fuel at speed due to internal valve problems. In my experience fuel vaporisation only occurs when stationary or moving very slowly - at speed everything should be cool enough with the airflow?
There are many other possibilities but I would have thought these were the most likely.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
richardlewis
Member
***
Posts: 35

Appia series 3 berlina LSJ 251


« Reply #21 on: 15 September, 2021, 05:07:22 PM »

Hello everyone, all good stuff to consider, sounds likely it's the fuel pump, so will direct my friend accordingly, plus checking the fuel lines.
Logged
Sebastien
Megaposter
*
Posts: 560


« Reply #22 on: 16 September, 2021, 03:51:18 PM »



Sounds a good idea. Do you have photo of how your parallel pumps are mounted, as I have seen some professional looking brackets/ banjo type fittings for cylindrical style twin pumps.

Richard


Here a picture - enjoy!
I think I can trust the fuel pump now!

PS: I notice it is my 500th post, since 2007....


* Fuel pumps - 1.jpg (399.95 KB, 1280x960 - viewed 200 times.)
« Last Edit: 16 September, 2021, 03:56:56 PM by Sebastien » Logged
Neil
Permanent resident
**
Posts: 1316



« Reply #23 on: 16 September, 2021, 03:52:54 PM »

Impressive, I hope the fuel hoses E10 safe
Logged

Neil   
386

1973 Fulvia S2 1.3
Sebastien
Megaposter
*
Posts: 560


« Reply #24 on: 16 September, 2021, 04:05:21 PM »

Good point - ideal would be to go back to original, only solid fuel lines, Nivex vacuum and no electric pumps.....

Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.05 seconds with 21 queries.