Cable diagram for electric window fulvia sport

[Tim Wilson]

Has anyone got a diagram of how the cables run for the electric window on a fulvia sport. I used to have one but it has disappeared and i am stuffed now having just replaced the motor.
could you possibly scan a copy to me please trwilson69@yahoo.co. Thanks.

[davidwheeler]

I have drawn the run on the inside of the passenger door but it is in the cold dark shed.  I'll see if I can get you a photo tomorrow.   

[Beckerman67]

Any help?

[SanRemo78]

I suspect Tim is asking for an an electrical wiring diagram for the cable runs to the motor on the rear hatch?

[Beckerman67]

 I have ...

[davidwheeler]

I suspect Tim is asking for an an electrical wiring diagram for the cable runs to the motor on the rear hatch?

No, definitely the picture above.  Just as well, my door is elsewhere!    I'll have a copy of that picture though.
Incidentally, I have burned out a motor on one window (stuck switch) and am in need of another.     Where did you get your replacement Tim?

[Tim Wilson]

Hi David
Thanks very much indeed for the diagram i picked up on the technical section. Yes it was for the electric window on the driver side ....the motor had seized and in fact this was already a replacement that i bought from Omicron years ago. I kept the original motors (horder!) and via a contact discovered a firm called Robson and Francis Rewinds. They have refurbished the two motors i kept and have done a fantastic job! They are at Robsonandfrancisrewinds.co.uk.Not cheap but ..... about £150 per motor. Replacing the motors is a pig of a job and requires bucket loads of patience!! Thanks again David for your help.

[Spider2]

I too have used Robson and Francis to rebuild the motor for my Zagato tailgate. Great old school dirty workshop but they know their business. Apparently they do all the various little motors for old Ferraris.
Mine was £165, in my opinion a fair price considering there are no replacements. Luckily the series 1 has manual window winders.