Lancia Motor Club Forum Banner
14 December, 2024, 01:01:05 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Engine mountings  (Read 1993 times)
0 Members and 4 Guests are viewing this topic.
Raahauge
Senior Member
*****
Posts: 135


« on: 22 August, 2022, 05:10:56 PM »

This is an alert and also a request for help.
I was cleaning up my driver's side mounting to bolt it back onto the block when I spotted it was cracked.
There are two types, malleable iron and steel fabrication.
I have one of each on my car but the one that is quite comprehensively cracked is fabricated from two pieces of pressed 2.5mm sheet spot welded together. It is an original item stamped Lancia.
I attach some pictures to illustrate the problem which would not be easily seen without a specific inspection, particularly under paint and dirt.
The crack on the back was difficult to see with the naked eye.
I can repair it but I would prefer another if anyone has one available, as far as I can determine they are not handed apart from the bell crank mounting for the throttle so a LH or RH one of either construction would be most welcome. The bell crank mounting can easily be attached.
Hope yours are all OK.


* IMG_8290.jpeg (652.86 KB, 1470x1960 - viewed 154 times.)
Logged
Raahauge
Senior Member
*****
Posts: 135


« Reply #1 on: 22 August, 2022, 05:14:32 PM »

Only one picture seems to have loaded, I will try again.


* IMG_8278.jpeg (560.99 KB, 1050x1400 - viewed 149 times.)
Logged
Raahauge
Senior Member
*****
Posts: 135


« Reply #2 on: 22 August, 2022, 05:16:44 PM »

And another.


* IMG_8288.jpeg (578.24 KB, 1260x1680 - viewed 153 times.)
Logged
Running Board
Senior Member
*****
Posts: 143



« Reply #3 on: 23 August, 2022, 10:55:18 AM »

i've probably got one , if you can wait until the weekend i will look for you, remind me though as i have a head like a sive at the moment  , j 07961713441
Logged

When it comes to Lancias, mine are State Of The Ark!
Raahauge
Senior Member
*****
Posts: 135


« Reply #4 on: 23 August, 2022, 12:15:38 PM »

Update: Thanks James but I think I have it sorted.
I bought a scrap engine last year that had probably been in an accident as both engine mounting appeared to be bent and the drivers side had pulled a chunk out of the water jacket. Upon another examination this morning the bolt and spring assembly on the NS mounting were well bent but the mounting itself seems to be OK.
I am just cleaning it up, if I am still in trouble I will get back to you.
Thanks.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.047 seconds with 20 queries.