08 September, 2024, 02:03:46 AM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Fulvia
>
Fanalone tracking setting
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Fanalone tracking setting (Read 1336 times)
0 Members and 2 Guests are viewing this topic.
Jai Sharma
Megaposter
Posts: 474
Fanalone tracking setting
«
on:
26 September, 2023, 09:29:44 PM »
Hi, does anyone have the tracking setting for a 1.6 HF series 1? I had a track rod replaced but would like to check this.
Thanks (and I need to get a manual again, having given my old ones away).
Logged
Charles Frodsham
Megaposter
Posts: 247
Re: Fanalone tracking setting
«
Reply #1 on:
29 September, 2023, 07:35:49 PM »
Just had a look at my concise repair shop manual…..
Camber with car under static load +2degrees on 1.3 models, -1 degree on 1.6 coupe
Toe out setting under static load……1-3 mm on all models
There is a very complex procedure that follows, which I struggle to follow……let me know if you need it.
Cheers Charles
Logged
Jai Sharma
Megaposter
Posts: 474
Re: Fanalone tracking setting
«
Reply #2 on:
29 September, 2023, 08:46:52 PM »
Thanks Charles that is helpful and probably all I need.
Logged
HBG
Megaposter
Posts: 270
Re: Fanalone tracking setting
«
Reply #3 on:
30 September, 2023, 07:49:37 PM »
Had the tracking done on my Fulvia this morning. I asked for 10 mins toe out on each front wheel as I'd been advised that this was the correct figure. The garage asked for camber and caster angles as the laser machine required to know. These figures were in the handbook even though they are unadjustable.
What I learned this morning is that the clamps that hold the track rod to the ball joints at the inner end will foul the body if not oriented correctly.
Logged
ColinMarr
Permanent resident
Posts: 1655
Re: Fanalone tracking setting
«
Reply #4 on:
01 October, 2023, 11:54:43 AM »
That’s interesting. I suppose modern tracking instruments use light beams and mirrors to determine the angle of alignment, all very clever. 10 minutes of 1.0 degree works out to be the equivalent of about 1.0 mm of toe-out at the rims. In ancient times I used an improvised giant caliper to set mine to about 2.0 mm, which seemed correct.
Logged
HBG
Megaposter
Posts: 270
Re: Fanalone tracking setting
«
Reply #5 on:
01 October, 2023, 09:15:55 PM »
I considered making an accurate timber frame to hold strings but thought better of it!
Logged
frankxhv773t
Permanent resident
Posts: 2223
Re: Fanalone tracking setting
«
Reply #6 on:
02 October, 2023, 09:36:00 AM »
I use a "Trackace Laser Wheel Alignment" setup which costs about £75 which I find very effective.
https://www.youtube.com/watch?v=5VCo72Fyrao&ab_channel=Britishbusinessman
Logged
Simon B
Member
Posts: 36
Re: Fanalone tracking setting
«
Reply #7 on:
06 October, 2023, 12:03:51 PM »
The Trackace looks good Frank, do you load the car in anyway before checking as the dimensions quoted for toe out are with the car under static load?
Does anyone know how much difference unloaded vs loaded suspension makes to tracking dimensions?
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...