Lancia Motor Club Forum Banner
21 December, 2024, 04:37:52 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Lancia Motor Club > Model Technical and Interest > Fulvia > Fulvia Gearbox
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Fulvia Gearbox  (Read 1321 times)
0 Members and 1 Guest are viewing this topic.
Mark Goldsmith
Member
**
Posts: 14
« on: 15 January, 2024, 11:48:30 AM »
Just some quick advice, I’ve got my subframe out with my engine and was looking at my gearbox, do they suffer from any problems? And is it worth doing anything to it while I have access to it? And what’s the best way to preserve the subframe power coat or paint? Thanks
Mark
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5058
« Reply #1 on: 15 January, 2024, 12:02:35 PM »
Re Gearbox (4 or 5 speed?) do the driveshaft output seals and the input shaft needle roller and 2 little oil seals (or maybe one depending how early a box is). If 5 speed look at the change rod bushes and seals - probably worn I replace the nylon bushes with sintered bronze...
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Mark Goldsmith
Member
**
Posts: 14
« Reply #2 on: 15 January, 2024, 12:43:08 PM »
Its a 5 speed box.
Logged
nistri
Megaposter
*
Posts: 565
« Reply #3 on: 15 January, 2024, 07:17:54 PM »
clutch bearing plus clutch, and on the engine flywheel bearing and oil seal
Logged
Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
lancialulu
Press Officer
Permanent resident
*****
Posts: 5058
« Reply #4 on: 15 January, 2024, 10:51:08 PM »
How was the gearbox performing?
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
davidwheeler
Permanent resident
**
Posts: 1487
« Reply #5 on: 16 January, 2024, 09:53:31 PM »
I would go for powder coat, then cover it inside and out with schuss.
Logged
David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
Mark Goldsmith
Member
**
Posts: 14
« Reply #6 on: 16 January, 2024, 11:41:34 PM »
Quote from: lancialulu on 15 January, 2024, 10:51:08 PM
How was the gearbox performing?

I’m not sure as I bought the car running but not driving, but it’s fairly low mileage.
Logged
Pages: [1]   Go Up
  Print  
« previous next »
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.036 seconds with 21 queries.