SUBFRAME BOLTS

[Nigel1967]

Hi All... happy Friday....  i have a squeak from the front subframe where it attaches to the sill. I read on another thread that it could be a case of simply tightening the bolt that holds the bushings however looking at mine, i can see the threaded bold sticking out under the car with two nuts on the end. Its the same both sides but looking at the workshop manual it looks like the bolt should be the other way up with the bold head protruding down under the car.
Any thoughts greatly appreciated.
Many thanks
Nigel.

[lancialulu]

As you observe this is not factory. that area is vulnerable to corrosion and there are not many Fulvias that have not had extensive metal repairs in that area. I would advise a close look for rust and past repairs.