Window Rubbers Quality. ALL SORTED NOW. THANK YOU.

[37Aprilia]

Hello all.... again !!

Does anybody have any experience of fiting replacement front or rear screen / window rubbers ?

Are the ones you can buy accurate ? A good fit ?

Are there good ones AND better ones ?

Any guidance or advice would be really appreciated.

Thank you.  

[Kari]

Cicognani in Italy

https://www.cicognaniguarnizioni.it/   There is a button on the top of the page for English language.

Regards

Karl

[Jay]

I am currently restoring a Aprilia, and haven’t done this job. However I have been told by various of UK experts not to waste money on the expensive Italian front and rear seals, but use the standard S type you can purchase from Woollies or Phoenix Trim. Go for the mid-size as it’s easier to manipulate around the corners, I believe you can purchase or ask for samples, plus it can be glued.     

[Sliding Pillar]

I have used the Cicognani seals in the past. If you want the car to look original I think it's the only choice as they fit much better in the corners.

[37Aprilia]

Cicognani in Italy

https://www.cicognaniguarnizioni.it/   There is a button on the top of the page for English language.

Regards

Karl

Thank you Kari, I'll have a look at that site.

[simonandjuliet]

Try Elvezio as well, sometimes one is cheaper than the other ... probably the same supplier to both

[37Aprilia]

I am currently restoring a Aprilia, and haven’t done this job. However I have been told by various of UK experts not to waste money on the expensive Italian front and rear seals, but use the standard S type you can purchase from Woollies or Phoenix Trim. Go for the mid-size as it’s easier to manipulate around the corners, I believe you can purchase or ask for samples, plus it can be glued.     

Thank you Jay. That's another option to look at.

[37Aprilia]

Try Elvezio as well, sometimes one is cheaper than the other ... probably the same supplier to both

Thank you SimonandJuliet. I hadn't heard of those before, I'll certainly take a look. Totally new to Lancia, LOTS to learn about who supplies what and which is the most sensible buy.

[37Aprilia]

I have used the Cicognani seals in the past. If you want the car to look original I think it's the only choice as they fit much better in the corners.

Thank you Sliding Pillar. Recommendations are so useful to me at this stage.