Lancia Motor Club Forum Banner
30 November, 2024, 10:41:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: noisy gearbox  (Read 4085 times)
0 Members and 3 Guests are viewing this topic.
dhla40
Senior Member
*****
Posts: 189


« on: 22 May, 2011, 05:45:40 PM »

Any gearbox guru's out there?  My S2 coupe is fairly quiet in neutral and when coasting but under load is very noisy, does anyone have experience of this and know which bearing tends to go first or any other likely causes.

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
sweeet-twincam
Member
***
Posts: 40


« Reply #1 on: 23 May, 2011, 10:13:27 PM »

Hi, i`d say that it was the input shaft bearings.... if the noise is evident all the time, under light load.... not sure if new bearings are available for those boxes, not had one apart for a LONG time..
Regards Mark
Italian Race Services
Logged
dhla40
Senior Member
*****
Posts: 189


« Reply #2 on: 24 May, 2011, 04:22:09 PM »

Drained the oil today and found what looks like part of a tooth on the mag plug Sad  Looks like I will have to fit my spare box which has been lying under a tarp in the back garden, lets hope that one isn't buggered as well Roll Eyes

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
Fulvia365
Lapsed
Member

Posts: 3


« Reply #3 on: 18 June, 2011, 01:11:49 PM »

Not meant to be a trivial response  . .  probably my ignorance but worried that gearbox on my S3  had got very noisy then realised that rubber grommet surrounding gearstick had cracked.
Fitted a new one (Omicron) and was surprised how quiet it all was.

Hope your problem is as trivial . .
Logged
dhla40
Senior Member
*****
Posts: 189


« Reply #4 on: 19 June, 2011, 04:03:39 PM »

 fitted my spare gearbox last week and luckily it seems ok Grin Have not stripped the old one down yet but there is loads of backlash between the drive flanges so it would seem that the problem is at the crownwheel/pinion end.

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
dhla40
Senior Member
*****
Posts: 189


« Reply #5 on: 05 July, 2011, 05:15:56 PM »

Dismantled the noisy gearbox today and found the pinion teeth were as sharp as razors, think I was lucky to get back from Beaulieu without stripping the gear completely Shocked On the plus side the other gears and bearings look ok so they can join the other spares/junk at the back of the garage.

Sean
Logged

1976 1.3s coupe
1973 1.3s coupe
1982 montecarlo project
1976 alfa GT
1981 alfa spider
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.049 seconds with 20 queries.