Lancia Motor Club Forum Banner
26 December, 2024, 04:41:58 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: MAS893  (Read 6368 times)
0 Members and 6 Guests are viewing this topic.
appiaman
Senior Member
*****
Posts: 144



« on: 12 December, 2012, 08:01:17 PM »

I decided about 2 months ago after starting with the Ardenne and having had problems with main structure of it, to pass it on to my qualified metal man to work on it full time. I was then faced with the problem that I had no new building project and a guy employed with no work .
I decide in my wisdom that a bare metal repaint on the appia would be easy project to do.
Having owned the car for nearly 20 years I and not knowing of any rust we started.
The last time I painted it was 1992  and it was only a flat and spray job saying that it stood the test of time.
Having half stripped the interior last year the car didn’t see much use and it did looked much neglected.
However,
Over the last 3 years I have collected various bit for it new backlights ,new back bumper, new door rubbers new windscreen rubbers, new tyres new stainless exhaust the list goes it was time to put all these bits to use.
Stripping always seem very easy  but putting back takes forever.
Having stripped the car back to bare metal it did reveal a few battle marks but nothing too serious and no rust.
Having not painted for 20 years I had a challenge on my hand. I bought compressor, spray guns and all the tools and the garage was converted into a very un desirable paint shop with loads off errors and finding my way round 2 pack paint again.
Say that after 2 months of trial and error and loads of flatting and polishing the car seems presentable again to me.
Attached are a few pictures
The last stage now is Brian Cates is busy redoing the roof lining in West of England cloth and will be collecting the seats on Monday to recover them in nice red leather so hopefully he will be looking nice and sharp next year for events and I am hoping to use it every day again as 20 years ago it was my uni car to university and it has plenty stories to tell.


* IMG_0998.JPG (252.33 KB, 1224x1632 - viewed 563 times.)

* IMG_0999.JPG (244.38 KB, 1224x1632 - viewed 558 times.)
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
Parisien
Administrator
Permanent resident
*****
Posts: 4375



« Reply #1 on: 12 December, 2012, 08:07:10 PM »

Just divine......great to see....great to witness another caring Lancisti doing it right!


P
Logged

Frank Gallagher
appiaman
Senior Member
*****
Posts: 144



« Reply #2 on: 30 June, 2013, 03:39:16 PM »

After 5 months of waiting and still waiting  for the last bits i have the main car back from Brian Cates
its now has red leather seats and a new wool roof lining.
It looks great on first seeing it and the car definitely needed a new interior as it was the originals it left the factory with.
However the price of the work reflects it and its not as perfect as the series 1  and  I am still awaiting for the dash and sun visors to come back.
Not sure when that will happen but I hope to have the car around for the economy run this year lets watch this space.





* 021.JPG (741.67 KB, 1368x1824 - viewed 533 times.)

* 022.JPG (317.69 KB, 912x684 - viewed 529 times.)

* 024.JPG (235.24 KB, 912x684 - viewed 517 times.)

* 030.JPG (226.33 KB, 912x684 - viewed 525 times.)

* 026.JPG (165.72 KB, 912x684 - viewed 562 times.)
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
appiaman
Senior Member
*****
Posts: 144



« Reply #3 on: 30 April, 2015, 06:26:56 PM »

I need some help do anyone now of a good place I can send my petrol tank too for repair .
The Appia been sitting now for over a year at the farm with a list of stuff thats wrong the tank is the first major issue , then brakes and front suspension .
All help be much appreciated.
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
mikeC
Lapsed
Megaposter
*
Posts: 358



« Reply #4 on: 30 April, 2015, 07:05:23 PM »

If you have a good radiator specialist nearby, there's a good chance he will be happy to look at your petrol tank.
Logged

1953 Lancia Appia Series 1
1931 Austin Seven deluxe saloon
1914 Saxon Model A roadster


(previously owned Lancias: 1958 Appia Pininfarina coupe, 1987 Delta LX, 1986 Delta cabriolet, 1991 Dedra 1.8, 1993 Dedra 1.6)
Dilambdaman
Permanent resident
**
Posts: 1380



« Reply #5 on: 07 May, 2015, 09:17:33 AM »

Hi Christo,

Aaron Radiators in Croydon did a fantastic job on the Dilambda petrol tank some years ago and rebuilt Elaine Moore's Dilambda radiator for her to a very high standard. Highly recommend them and they turn jobs around quickly too.

http://www.aaronradiator.co.uk/

Robin.
Logged

Robin Lacey 3222

1932 Dilambda
1992 Y10 GTie
2012 Delta Mk3
2013 Ypsilon 846
RobD
Lapsed
Senior Member
*****
Posts: 180



« Reply #6 on: 07 May, 2015, 04:24:27 PM »

Beautiful looking car- and the paintwork looks excellent in the pics so the makeshift paint booth must have done its job! Nice to have a car with a bit of personal history attached to it.
Logged

You're all entitled to my opinion.
'75 Fulvia 1.3S
'68 works Laverda 125cc ISDT
KTM 640 Adventure
Yamaha TDM 900
Numerous Gas Gas trail bikes...
www.adventureride.co.uk
appiaman
Senior Member
*****
Posts: 144



« Reply #7 on: 12 May, 2015, 10:42:16 AM »

Hi Robin , thanks for reply.
I have now send the tank now off to Hartlepool and online company which Don has used.
Not cheap but the tank was basly rusted dented not in great shape.
Rob the paint work was good but it took a lot off  effort without a booth it doesn't really work 4 years on now the boot is blistering again due to moisture .
But then I did paint it in the winter.
Yep I was working out today I have owned it 22 years  I learn to drive in it so not much value as acar but a lot of sentiment to me.
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.051 seconds with 21 queries.