Lancia Motor Club Forum Banner
23 December, 2024, 07:19:49 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Solex C32 PAIA 8 Carburettor manual?  (Read 11567 times)
0 Members and 5 Guests are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« on: 03 March, 2013, 09:24:35 AM »

I have rebuilt my Solex Carb fitted to my Flavia Vignale and would like to know how to test the functioning of the second (vacuum operated) choke.

I have replaced the perished diaphragm (although it did not look like it was totally u/s) and the car runs nicely in the garage but I cannot see the second choke opening in garage running conditions. I should say I checked the air(-ve) way to the diaphragm and installed new gaskets etc. All the other part of the carb seems to work properly including the accelerator pump.

Any help especially a manual on the carburettor would be great.

Thanks

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #1 on: 03 March, 2013, 10:13:30 AM »

If you can see 110 MPH on the speedo it's probably working OK!

Colin
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #2 on: 03 March, 2013, 10:17:04 AM »

Thanks Colin!!

Cant quite get that in my garage  Angry

Did you have any trouble with yours?

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Richard Fridd
Permanent resident
**
Posts: 3491



« Reply #3 on: 04 March, 2013, 09:11:04 AM »

A different model with mention of a third butterfly, so may or may not be of interest.


* Maidstone-20130304-00137.jpg (74.89 KB, 640x480 - viewed 531 times.)

* Maidstone-20130304-00138.jpg (71.42 KB, 640x480 - viewed 510 times.)
« Last Edit: 04 March, 2013, 11:54:46 AM by Richard Fridd » Logged

Richard Nevison Fridd                                                                      Happy Lancia, Happy Life
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #4 on: 04 March, 2013, 09:53:17 AM »

Thanks Richard

It is similar but not with the third butterfly! I guess I need to drive it on the road. More anon.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #5 on: 04 March, 2013, 06:44:55 PM »

My Flavia had Kugelfischer petrol injection so I never had this problem. My Beta 1600 had a twin-choke carb with the second one only opening up under load, which is not easy to check other than on the road. Maybe Betaboyz can advise.

Colin
Logged
neil-yaj396
Committee
Permanent resident
*****
Posts: 1272



« Reply #6 on: 04 March, 2013, 07:36:29 PM »

On the Beta the second choke opens when you give full throttle (in sync with the accelerator pump - more fuel & more air). The Beta carbs are Weber though.
Logged

1979 1300 Beta Coupe, 2014 Ypsilon 1.2 S Series Momo
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #7 on: 05 March, 2013, 11:33:32 AM »

Took it out for a local run yesterday with Sarah driving (she loved it) and while we did not get anywhere near 110 it certainly ran well with lots of urge  Grin... so it may well be OK only time will tell.

Still on the look out for a manual on how the carb works though. A part list/pic doesnt really do it. Angry
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Brian Long
Senior Member
*****
Posts: 122

Aurelia B12, Flavia 2000 Coupe


« Reply #8 on: 31 March, 2013, 11:03:12 PM »

The Sunbeam Alpine and Humber Vogues used the same carburettor. The workshop manual has a very good section on the carburettor.
You won't be able to determine if the second throat is working 'in the garage'. The opening of the second throat is dependent on two things. Air speed through the primary throat has to be high enough to provide a low pressure on the non-vented, upper section of the diaphragm. Secondly, the accelerator pedal has to be beyond about half-open. At that point the mechanism on the side of the carburettor will allow the second throat butterfly to travel in unison with the primary one. If you carefully adjust and lubricate the accellerator linkages and cable you should be able to feel through your foot when the additional effort needed to open the second throat comes into play.
It is worthwhile setting it all up properly. My Flavia 2000 returns up to 30MPG (in real units) on along trip.
Good luck.
Brian Long
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #9 on: 01 April, 2013, 08:13:56 PM »

Thanks Brian

will wait for some good weather and see what transpires.

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
lancialulu
Press Officer
Permanent resident
*****
Posts: 5059



« Reply #10 on: 23 April, 2013, 10:49:37 AM »

If you can see 110 MPH on the speedo it's probably working OK!

Colin

saw genuine 95 and still going when I noticed I had gone into the red 5500 rpm so eased off. No sign of strangulation so I assume all is working!?

Tim
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ColinMarr
Permanent resident
**
Posts: 1660



« Reply #11 on: 24 April, 2013, 07:48:45 PM »

That sounds good. The Kugelfischer Flavias had longer legs and gave more than 20 mph per thousand rpm – see photo. I think the Zagato cars with twin carbs did too.

Colin


* Vignale911.jpg (243.94 KB, 1167x795 - viewed 513 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.072 seconds with 21 queries.