Lancia Motor Club Forum Banner
14 December, 2024, 08:42:32 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Steering Wheel Removal  (Read 5263 times)
0 Members and 5 Guests are viewing this topic.
Jay
Megaposter
*
Posts: 440



« on: 01 July, 2015, 07:56:44 AM »

Any suggestions please.

Has anyone removed the steering wheel from a Touring or Zagato Flaminia or similar on an Aurelia. After removing the horn button and cover, there doesn’t seem to be any nut or fixings, all I can see down the tube is what I think is the slotted end of the steering shaft with a circlip. Looking at the parts manual it appears that only the circlip holding the wheel on.

Does anyone know if this is the case and if so how tight was the wheel on the spline? So do I need to make a puller to get it off?       
Logged

Julian Wood, Kingston, London
dannels
Megaposter
*
Posts: 305



« Reply #1 on: 02 July, 2015, 11:59:48 AM »

Hi Julian

The wheel is attached by screws on the rear of the boss - it should remove easily

Do you need to remove the centre boss as well?

Cheers
Dave
Logged

1961 Flaminia GT, 1966 Matra Djet V
Jay
Megaposter
*
Posts: 440



« Reply #2 on: 02 July, 2015, 12:32:03 PM »

Cheers Dave

So the screws that hold the horn cap and cover also hold the wheel on to the boss? As I don’t need to remove boss, I guess I will give it a whack and see what happens.

BTW I removing it as the wood needs a small amount of gluing.

Hope to catch up at Silverstone.
Logged

Julian Wood, Kingston, London
Jay
Megaposter
*
Posts: 440



« Reply #3 on: 11 July, 2015, 01:05:57 PM »

It looks like for series 2 GTs cars, the wheel is screwed/bolted to the boss and on my car at least the heads are ground down, so no way of separating the wheel and boss without some major machining. Much to my surprise, I read about it but never tried it, the boss/hub slides up and down on the steering column spline to adjust the wheel distance, so removing the circlip lets the wheel and boss slide straight off.

Plus few pictures of before and after of the wheel.       


* Hub.JPG (180.54 KB, 968x726 - viewed 501 times.)

* Before.JPG (156.29 KB, 1000x750 - viewed 524 times.)

* During.JPG (303.97 KB, 984x738 - viewed 529 times.)

* After.JPG (223.46 KB, 968x726 - viewed 526 times.)
Logged

Julian Wood, Kingston, London
frankxhv773t
Permanent resident
**
Posts: 2245



« Reply #4 on: 12 July, 2015, 05:33:28 PM »

What I nice job.
Logged
simonandjuliet
Permanent resident
**
Posts: 2559



« Reply #5 on: 12 July, 2015, 06:44:42 PM »

Lovely, like the "ebony" spots !
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia, 2xArdea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20s4,R4 Sinpar, R4 Rodeo, 65 Moke, 3xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole,LR Defender, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.068 seconds with 20 queries.