lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
 |
« Reply #210 on: 21 August, 2024, 05:17:38 PM » |
|
What was not obvious when I started was that the aluminium drum had a lip holding the cast iron liner in place along with the pegs, my theory was that if I bashed half of the lip off when the liner was cut in half one half could be tappe out and the other knocked out as it had room to move. One snag was when the liner was cut through it pinched the jigsaw blade and nearly pulled my arm off as the blade was stuck but the jigsaw still went up and down! I will have to decide if it is a good use of my time splitting the front drums up...watch this space.
Clarkey
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #211 on: 22 August, 2024, 05:18:47 PM » |
|
Hi all
My mate Terry and I managed to refine the process to just one cut through the drum and liner and with a bit of levering the liner comes out in one piece...result! time spent down to about 15 minutes. Problem is we burnt out the jigsaw.
Clarkey
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #212 on: 11 September, 2024, 06:53:18 PM » |
|
Well we are getting near to scrapping the unloved S2 so get in touch if you need any parts it has a good set of four 15" wheels, a working engine and gearbox, front seats, doors, bonnet, boot, grill, wiring loom, horn, bonnet and boot catches, petrol tank etc.
Clarkey
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
|
Spider2
|
|
« Reply #213 on: 12 September, 2024, 12:34:38 PM » |
|
Hi,
I need:
1/ Horn
2/ x 1 Headlamp chrome surround
3/ Interier roof lamp assembly
4/ Heater valve and cable
5/ Speedo cable
6/ Side panels (by drivers and passengers knees)
6/ Possibly wiring loom.
I have finished phase 1 of the recommisioning so the car is safe and driveable. Phase 2 will be the nice to do items so I am sure I will need a lot more in due course. Will all the bits be kept in storage?
Cheers
Simon
|
|
|
|
|
Logged
|
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #214 on: 13 September, 2024, 12:50:37 PM » |
|
Hi Simon
All the parts are in storage now I just have to take the front axle off. I will check what we have on your list and get in touch. see pictures
Clarkey
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #215 on: 16 September, 2024, 08:45:04 PM » |
|
Hi all
The S2 is stripped now with the following parts available
engine
gearbox
front seat
steering column
steering wheel
front doors in aluminium
boot
bonnet in aluminium
grill
wiring loom
plus many others so get in touch.
Clarkey
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #216 on: 17 September, 2024, 04:20:42 PM » |
|
Said goodbye to the S2 today...it seems the bottom has fell out of the scrap market as 3 metal recyclers were going to charge me to come and pick up the shell! anyway my local scrapman came and took the lot FOC so saved a lot of hassle. He wasn't too impressed that he could pick up one corner of the shell single handed.
Clarkey
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #217 on: 25 November, 2024, 07:29:45 PM » |
|
Hi all
Amongst a lot of things picked up from the late Don Cross's estate was a small rather heavy bag containing ' a thing to trim your brake shoes with' so here it is in all it's electro/mechanical glory. The question is has any one ever used it and was it of any use?
Clarkey
ps I feel sure there must be some instructions somewhere but I have not come across them yet.
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #218 on: 25 November, 2024, 07:36:13 PM » |
|
some pictures
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #219 on: 25 November, 2024, 07:40:24 PM » |
|
Attached to the plate were four large nuts that I assume act as spacers and would fit behind the circular plate that would be fastened on with wheel nuts. There were several grinding bits of different diameters so presumably you can take off enough to get the thickness of lining you require.
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
GerardJPC
Megaposter
Posts: 338
|
|
« Reply #220 on: 01 December, 2024, 07:01:47 AM » |
|
Thanks for these great updates, Jim!
|
|
|
|
|
Logged
|
1962 Appia Berlina
1973 2000 HF Coupe
1978 Beta 1600 Coupe
1973 Fiat 124 Sport Coupe 1800
1981 Lotus Eclat S2
1982 Moto Guzzi V50 Monza
1982 Yamaha YB 100
1983 Land Rover SIII 88
2005 Alfa Romeo 156 Crosswagon Q4
2009 Jaguar XK 5.0
|
|
|
lancianut666
Permanent resident
Posts: 1786
Slow but rough
|
|
« Reply #221 on: Yesterday at 10:21:17 PM » |
|
Some good news for a member with severe engine difficulties as he has reported the engine from Don Cross' estate is installed and going well.
|
|
|
|
|
Logged
|
Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
|
|
|
|
