Lancia Motor Club Forum Banner
27 December, 2024, 12:41:34 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Augusta floor and transmssion mats  (Read 2748 times)
0 Members and 1 Guest are viewing this topic.
Mikenoangelo
Megaposter
*
Posts: 465


« on: 07 September, 2020, 08:48:20 PM »

Has anyone experience of these?

https://www.lanciavintage.net/en/interior-and-upholstery/252-full-set-of-rubber-mats-lancia-augusta.html

I could do with a new transmisson cover as mine has become hard and cracked and wonder if the above are any good - the picture is not very convincing!

Mike
Logged
Sliding Pillar
Permanent resident
**
Posts: 1726



« Reply #1 on: 08 September, 2020, 06:37:37 AM »

You can get them direct from the manufacturer, buying just the parts you require. They are made from the original moulds, but the floor mats are not quite as thick as the originals.
http://www.cicognaniguarnizioni.it/Lancia-132/augusta-132-f95
Logged

1955 Aurelia
1961 Lamborghini
Kari
Senior Member
*****
Posts: 196


« Reply #2 on: 08 September, 2020, 08:12:49 AM »

I bought a whole set at Cicognani. It worked out well. It will need fairly thick felt or similar padding underneat. I have attached the part over the transmission tunnel permanently at the floor L/H and R/H

Regards  Karl


* IMG_2951.JPG (611.67 KB, 1306x979 - viewed 361 times.)
Logged
Mikenoangelo
Megaposter
*
Posts: 465


« Reply #3 on: 08 September, 2020, 08:30:54 AM »

Thank you chaps - I'll go that route.

Mike
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.067 seconds with 20 queries.